From: CCIEin2006 (ciscocciein2006@gmail.com)
Date: Tue Apr 04 2006 - 15:12:25 GMT-3
Wow - I didn't know you could run IPv6 on a 2500...does it also support
OSPFv3?
On 4/4/06, Petr Lapukhov <petrsoft@gmail.com> wrote:
>
> Hi,
>
> you shoud use
>
> 12.2(15)T IP Plus
> or
> 12.3 IP Plus
>
> you will need 16mb flash and 16bm DRAM
>
> HTH
> Petr
>
> 2006/4/4, b1t AvAtAr <b1t.avatar@gmail.com>:
> >
> > Hi Guys, please could anyone support me on this One, Which IOS Image
> > should
> > I use to support IPV6 in this 2522 Router
> >
> > FRS-BB2#conf te
> > Enter configuration commands, one per line. End with CNTL/Z.
> > FRS-BB2(config)#interface Loopback0
> > FRS-BB2(config-if)# ip address 220.20.3.1 255.255.255.0
> > FRS-BB2(config-if)# ipv6 address 2001:220:20:3::1/64
> > ^
> > % Invalid input detected at '^' marker.
> >
> > FRS-BB2(config-if)# ipv6 rip RIPng enable
> > ^
> > % Invalid input detected at '^' marker.
> >
> > FRS-BB2(config-if)#!
> > FRS-BB2(config-if)#interface Loopback1
> > FRS-BB2(config-if)# ip address 222.22.2.1 255.255.255.0
> > FRS-BB2(config-if)# ipv6 address 2001:222:22:2::1/64
> > ^
> > % Invalid input detected at '^' marker.
> >
> > FRS-BB2(config-if)# ipv6 rip RIPng enable
> > ^
> > % Invalid input detected at '^' marker.
> >
> > FRS-BB2(config-if)#!
> > FRS-BB2(config-if)#interface Loopback3
> > FRS-BB2(config-if)# ip address 205.90.31.1 255.255.255.0
> > FRS-BB2(config-if)# ipv6 address 2001:205:90:31::1/64
> > ^
> > % Invalid input detected at '^' marker.
> >
> > FRS-BB2(config-if)# ipv6 rip RIPng enable
> > ^
> > % Invalid input detected at '^' marker.
> >
> > FRS-BB2(config-if)#!
> > FRS-BB2(config-if)#interface Loopback51515151
> > FRS-BB2(config-if)# ip address 51.51.51.51 255.255.255.255
> > FRS-BB2(config-if)# ipv6 address 2001:51:51:51::51/64
> > ^
> > % Invalid input detected at '^' marker.
> >
> > FRS-BB2(config-if)#
> > FRS-BB2(config-if)#do show ver
> > ^
> > % Invalid input detected at '^' marker.
> >
> > FRS-BB2(config-if)#^Z
> > FRS-BB2#show ver
> > Cisco Internetwork Operating System Software
> > IOS (tm) 2500 Software (C2500-JS-L), Version 12.2(27), RELEASE SOFTWARE
> > (fc3)
> > Copyright (c) 1986-2004 by cisco Systems, Inc.
> > Compiled Tue 02-Nov-04 22:01 by kellmill
> > Image text-base: 0x0307D390, data-base: 0x00001000
> >
> > ROM: System Bootstrap, Version 11.0(10c), SOFTWARE
> > BOOTLDR: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c),
> RELEASE
> > SOFTWARE (fc1)
> >
> > FRS-BB2 uptime is 5 days, 14 hours, 35 minutes
> > System returned to ROM by reload
> > System image file is "flash:/c2500-js-l.122-27.bin"
> >
> > cisco 2522 (68030) processor (revision M) with 14336K/2048K bytes of
> > memory.
> > Processor board ID 14512161, with hardware revision 00000003
> > Bridging software.
> > X.25 software, Version 3.0.0.
> > SuperLAT software (copyright 1990 by Meridian Technology Corp).
> > TN3270 Emulation software.
> > Basic Rate ISDN software, Version 1.1.
> > 1 Ethernet/IEEE 802.3 interface(s)
> > 2 Serial network interface(s)
> > 8 Low-speed serial(sync/async) network interface(s)
> > 1 ISDN Basic Rate interface(s)
> > 32K bytes of non-volatile configuration memory.
> > 16384K bytes of processor board System flash (Read ONLY)
> >
> > Configuration register is 0x2102
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:56 GMT-3