From: Bryan Fetzer (cciebfetzer@gmail.com)
Date: Tue Apr 04 2006 - 13:29:09 GMT-3
You probably want this one: c2500-is-l.122-15.T17.bin
b1t AvAtAr wrote:
> Hi Guys, please could anyone support me on this One, Which IOS Image should
> I use to support IPV6 in this 2522 Router
>
> FRS-BB2#conf te
> Enter configuration commands, one per line. End with CNTL/Z.
> FRS-BB2(config)#interface Loopback0
> FRS-BB2(config-if)# ip address 220.20.3.1 255.255.255.0
> FRS-BB2(config-if)# ipv6 address 2001:220:20:3::1/64
> ^
> % Invalid input detected at '^' marker.
>
> FRS-BB2(config-if)# ipv6 rip RIPng enable
> ^
> % Invalid input detected at '^' marker.
>
> FRS-BB2(config-if)#!
> FRS-BB2(config-if)#interface Loopback1
> FRS-BB2(config-if)# ip address 222.22.2.1 255.255.255.0
> FRS-BB2(config-if)# ipv6 address 2001:222:22:2::1/64
> ^
> % Invalid input detected at '^' marker.
>
> FRS-BB2(config-if)# ipv6 rip RIPng enable
> ^
> % Invalid input detected at '^' marker.
>
> FRS-BB2(config-if)#!
> FRS-BB2(config-if)#interface Loopback3
> FRS-BB2(config-if)# ip address 205.90.31.1 255.255.255.0
> FRS-BB2(config-if)# ipv6 address 2001:205:90:31::1/64
> ^
> % Invalid input detected at '^' marker.
>
> FRS-BB2(config-if)# ipv6 rip RIPng enable
> ^
> % Invalid input detected at '^' marker.
>
> FRS-BB2(config-if)#!
> FRS-BB2(config-if)#interface Loopback51515151
> FRS-BB2(config-if)# ip address 51.51.51.51 255.255.255.255
> FRS-BB2(config-if)# ipv6 address 2001:51:51:51::51/64
> ^
> % Invalid input detected at '^' marker.
>
> FRS-BB2(config-if)#
> FRS-BB2(config-if)#do show ver
> ^
> % Invalid input detected at '^' marker.
>
> FRS-BB2(config-if)#^Z
> FRS-BB2#show ver
> Cisco Internetwork Operating System Software
> IOS (tm) 2500 Software (C2500-JS-L), Version 12.2(27), RELEASE SOFTWARE
> (fc3)
> Copyright (c) 1986-2004 by cisco Systems, Inc.
> Compiled Tue 02-Nov-04 22:01 by kellmill
> Image text-base: 0x0307D390, data-base: 0x00001000
>
> ROM: System Bootstrap, Version 11.0(10c), SOFTWARE
> BOOTLDR: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c), RELEASE
> SOFTWARE (fc1)
>
> FRS-BB2 uptime is 5 days, 14 hours, 35 minutes
> System returned to ROM by reload
> System image file is "flash:/c2500-js-l.122-27.bin"
>
> cisco 2522 (68030) processor (revision M) with 14336K/2048K bytes of memory.
> Processor board ID 14512161, with hardware revision 00000003
> Bridging software.
> X.25 software, Version 3.0.0.
> SuperLAT software (copyright 1990 by Meridian Technology Corp).
> TN3270 Emulation software.
> Basic Rate ISDN software, Version 1.1.
> 1 Ethernet/IEEE 802.3 interface(s)
> 2 Serial network interface(s)
> 8 Low-speed serial(sync/async) network interface(s)
> 1 ISDN Basic Rate interface(s)
> 32K bytes of non-volatile configuration memory.
> 16384K bytes of processor board System flash (Read ONLY)
>
> Configuration register is 0x2102
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:56 GMT-3