From: Hash Aminu (hashng@gmail.com)
Date: Fri Mar 31 2006 - 05:32:20 GMT-3
Marc,
thank you for your response.
the Issue is that the router does not boot to the command line, it usually
get stucked @ the Technical Support. Ctrl+C or Ctrl+Z does not work . any
ideas ?
TIA
Hashiru
On 3/31/06, Marc Russell <mrussell@ccbootcamp.com> wrote:
>
> Get into config mode and type the command below and save.
>
>
> Router(config)#no prompt Technical Support:
>
>
> Marc Russell
> Network Learning, Inc.
> Ph# 248-620-9603
> www.ccbootcamp.com/hardware.html (CCIE practice hardware)
> www.ccbootcamp.com (CCIE Training)
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Hash
> Aminu
> Sent: Friday, March 31, 2006 3:14 AM
> To: Cisco certification
> Subject: Need Help With My Terminal Server [bcc][faked-from]
> Importance: Low
>
> Hello GS,
>
> I have thi sproblem with my Terminal Server in my Home Lab. Its a 2511 and
> anytime i switch it on it came up with a prompt that reads "Techinical
> Support:"
> I believed somehow someone know someway outta this Issue because its
> really
> preventing me to go on with my Labbing. below is the message its giving
> me...
>
>
> System Bootstrap, Version 11.0(10c),
> SOFTWARE
> Copyright (c) 1986-1996 by cisco
> Systems
> 2500 processor with 14336 Kbytes of main memory
>
> %SYS-4-CONFIG_NEWER: Configurations from version 12.2 may not be correctly
> under
>
> stood.
> F3: 15535804+889700+1236752 at
> 0x3000060
>
> Restricted Rights Legend
>
> Use, duplication, or disclosure by the Government is subject to
> restrictions
> as set forth in subparagraph
> (c) of the Commercial Computer Software - Restric Rights clause at FAR
> sec.
> 52.227-19 and subparagraph
> (c) (1) (ii) of the Rights in Technical Data and Computer Software clause
> at
> DFARS sec. 252.227-7013.
>
>
> cisco Systems, Inc.
> 170 West Tasman Drive
> San Jose, California
> 95134-1706
>
>
>
> Cisco Internetwork Operating System
> Software
> IOS (tm) 2500 Software (C2500-IS-L), Version 12.2(15)T17, RELEASE SOFTWARE
> (fc1)
>
>
> Technical Support: http://www.cisco.cm/techsupport
>
> Copyright (c) 1986-2005 by cisco Systems, Inc.
> Compiled Sat 13-Aug-05 15:26
> Image text-base: 0x0308038C, data-base:
> 0x00001000
>
> cisco 2511 (68030) processor (revision M) with 14336K/2048K bytes of
> memory.
>
> Processor board ID 15003458, with hardware revision 00000000 Bridging
> software.
> X.25 software, Version 3.0.0.
> 1 Ethernet/IEEE 802.3 interface(s)
> 2 Serial network interface(s)
> 16 terminal line(s)
> 32K bytes of non-volatile configuration memory.
> 16384K bytes of processor board System flash (Read ONLY)
>
> *Mar 1 00:00:10.983: %LINK-3-UPDOWN: Interface Ethernet0, changed state
> to
> up *Mar 1 00:00:10.987: %LINK-3-UPDOWN: Interface Serial0, changed state
> to
> down *Mar 1 00:00:11.355: %LINK-3-UPDOWN: Interface Serial1, changed
> state
> to down *Mar 1 00:00:20.283: %LINEPROTO-5-UPDOWN: Line protocol on
> Interface Ethernet0, changed state to up *Mar 1 00:00:30.935:
> %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0, changed state
> to
> up
> 00:00:36: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, changed
> state to down
> 00:00:38: %LINK-5-CHANGED: Inter~ace Serial0, changed state to
> administratively down
> 00:00:40: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1, changed
> state to down
> 00:00:41: %SYS-5-CONFIG_I: Configured from memory by console
> (Hashiru's_Termina_
> Server)
> 00:01:24: %SYS-5-RESTART: System restarted -- Cisco Internetwork Operating
> System Software IOS (tm) 2500 Software (C2500-IS-L), Version 12.2(15)T17,
> RELEASE SOFTWARE
> (fc1)
>
> Technical Support:
>
>
>
> Hashiru
>
>
> --
> B.Eng, MCP,CCNA, CCNP
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- B.Eng, MCP,CCNA, CCNP
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:40 GMT-3