From: Marc Russell (mrussell@ccbootcamp.com)
Date: Fri Mar 31 2006 - 05:23:33 GMT-3
Get into config mode and type the command below and save.
Router(config)#no prompt Technical Support:
Marc Russell
Network Learning, Inc.
Ph# 248-620-9603
www.ccbootcamp.com/hardware.html (CCIE practice hardware)
www.ccbootcamp.com (CCIE Training)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Hash
Aminu
Sent: Friday, March 31, 2006 3:14 AM
To: Cisco certification
Subject: Need Help With My Terminal Server [bcc][faked-from]
Importance: Low
Hello GS,
I have thi sproblem with my Terminal Server in my Home Lab. Its a 2511 and
anytime i switch it on it came up with a prompt that reads "Techinical
Support:"
I believed somehow someone know someway outta this Issue because its really
preventing me to go on with my Labbing. below is the message its giving
me...
System Bootstrap, Version 11.0(10c),
SOFTWARE
Copyright (c) 1986-1996 by cisco
Systems
2500 processor with 14336 Kbytes of main memory
%SYS-4-CONFIG_NEWER: Configurations from version 12.2 may not be correctly
under
stood.
F3: 15535804+889700+1236752 at
0x3000060
Restricted Rights Legend
Use, duplication, or disclosure by the Government is subject to restrictions
as set forth in subparagraph
(c) of the Commercial Computer Software - Restric Rights clause at FAR sec.
52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer Software clause at
DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California
95134-1706
Cisco Internetwork Operating System
Software
IOS (tm) 2500 Software (C2500-IS-L), Version 12.2(15)T17, RELEASE SOFTWARE
(fc1)
Technical Support: http://www.cisco.cm/techsupport
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Sat 13-Aug-05 15:26
Image text-base: 0x0308038C, data-base:
0x00001000
cisco 2511 (68030) processor (revision M) with 14336K/2048K bytes of memory.
Processor board ID 15003458, with hardware revision 00000000 Bridging
software.
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
16 terminal line(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read ONLY)
*Mar 1 00:00:10.983: %LINK-3-UPDOWN: Interface Ethernet0, changed state to
up *Mar 1 00:00:10.987: %LINK-3-UPDOWN: Interface Serial0, changed state to
down *Mar 1 00:00:11.355: %LINK-3-UPDOWN: Interface Serial1, changed state
to down *Mar 1 00:00:20.283: %LINEPROTO-5-UPDOWN: Line protocol on
Interface Ethernet0, changed state to up *Mar 1 00:00:30.935:
%LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0, changed state to
up
00:00:36: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, changed
state to down
00:00:38: %LINK-5-CHANGED: Inter~ace Serial0, changed state to
administratively down
00:00:40: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1, changed
state to down
00:00:41: %SYS-5-CONFIG_I: Configured from memory by console
(Hashiru's_Termina_
Server)
00:01:24: %SYS-5-RESTART: System restarted -- Cisco Internetwork Operating
System Software IOS (tm) 2500 Software (C2500-IS-L), Version 12.2(15)T17,
RELEASE SOFTWARE
(fc1)
Technical Support:
Hashiru
-- B.Eng, MCP,CCNA, CCNP
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:40 GMT-3