From: Brad Ellis (brad@ccbootcamp.com)
Date: Mon Mar 27 2006 - 15:46:55 GMT-3
Glad you figured it out. Cat6500s can be a bit tricky sometimes. It gets
really fun when you have an MSFC card in there, and you have to go back and
forth between the two consoles...and the MSFC looses it's OS! :)
thanks,
Brad Ellis
CCIE#5796 (R&S / Security)
CCSI#30482
Network Learning Inc - A Cisco Learning Partner (CLP)
YES! We take Cisco Learning credits!
brad@ccbootcamp.com
www.ccbootcamp.com (Cisco Training and Advanced Technology Rental Racks)
----- Original Message -----
From: "Malcolm Price" <malcolm.price@lanbase.com>
To: "Brad Ellis" <brad@ccbootcamp.com>
Sent: Monday, March 27, 2006 10:24 AM
Subject: RE: Catalyst 6513 zapping Supervisors [bcc][faked-from] [mx]
Hi Brad,
Thanks for the mail, you were quiet right, the boot loader variable was
missing and the switch processor config-register was wrong.
Initially a 48 port 10/100 line card was not inserted correctly which sent
the cat into overdrive.
Thanks for your input though, I appreciate it,
Thanks Brad,
Best Wishes,
Malcolm
-----Original Message-----
From: Brad Ellis [mailto:brad@ccbootcamp.com]
Sent: 27 March 2006 17:03
To: malcolm.price@lanbase.com; ccielab@groupstudy.com
Subject: Re: Catalyst 6513 zapping Supervisors [bcc][faked-from]
Malcom,
hi! Couple things, first, what supervisor engine? Second, what flavor of
IOS? (Also, Im assuming you checked the config registers?) Do you have
another Cat6500 around?
thanks,
Brad Ellis
CCIE#5796 (R&S / Security)
CCSI#30482
brad@ccbootcamp.com
www.ccbootcamp.com (Cisco Training and Advanced Technology Rental Racks)
----- Original Message -----
From: <malcolm.price@lanbase.com>
To: <ccielab@groupstudy.com>
Sent: Monday, March 27, 2006 5:55 AM
Subject: Catalyst 6513 zapping Supervisors [bcc][faked-from]
> Hi Group,
>
> I was just wondering if anyone had experienced a problem like this before.
> While deploying a new catalyst 6513, when you plug in the supervisor blade
> the IOS gets wiped and falls into RMON mode. This has happened to a few
> supervisors now and I was wondering if anyone had seen or experienced
> this.
> I'm suspecting a hardware problem with the chassis but any feedback would
> be most interesting :),
>
> TIA,
> Malcolm
>
> --------------------------------------------------------------------
> mail2web - Check your email from the web at
> http://mail2web.com/ .
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:40 GMT-3