From: Alexei Monastyrnyi (alexeim@orcsoftware.com)
Date: Sun Mar 26 2006 - 05:53:54 GMT-3
AFAIK, rp anycast requires a /32 routes to be supported by underlaying
IGP... not realy connected to BGP.
A.
----- Original Message -----
From: "david robin" <robindavi@gmail.com>
To: "Cisco certification" <ccielab@groupstudy.com>
Sent: Saturday, March 25, 2006 8:17 PM
Subject: anycast (ip multicast question)
>I have a question,
> we have two routers r1 and r2, the two routers has the same loopback
> address
> ( loop 2) and i want to configure them for rp anycast, this will require
> msdp configuration as follow:
>
> r1
>
> ip msdp peer r2 connect-source loop 0
> ip msdp originator-id loop 0
>
> and the same config on r2
>
> the question is for the anycast rp to work does the two routers require
> bgp
> peering between them for the msdp t or not ?
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:40 GMT-3