From: Hooman Parta (hooman@voipsol.com)
Date: Sun Mar 26 2006 - 04:25:20 GMT-3
Check this
http://www.cisco.com/en/US/tech/tk59/technologies_configuration_example09186
a00800fa54a.shtml
For more details just search Cisco.com to find more.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Jens
Petter Eikeland
Sent: Saturday, March 25, 2006 11:32 PM
To: Shang-Hsiung Huang; 'Cisco certification'; ccielab@groupstudy.com
Subject: Re: RADIUS
no, i dont mean 802.1X... This is is ppp sessions. I need some
documentation of how to sey up a RADIUS server for authenticating a ppp
session from a cisco router and then send the router are going to get a
specific ip address
jp
----- Original Message -----
From: "Shang-Hsiung Huang" <shang.huang@shanghsiung.com>
To: "Jens Petter Eikeland" <jenseike@start.no>
Sent: Saturday, March 25, 2006 11:47 PM
Subject: RE: RADIUS
Hi,
I think you mean 802.1X. We are testing the CISCO ACS 4.0 now. If logon
script is not required, user authentication and authorization work
perfectly. However, if logon script is required, then you will need PC
authentication also, and assign same user VLAN to the PC.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Jens Petter Eikeland
Sent: Saturday, March 25, 2006 8:21 AM
To: 'Cisco certification'; ccielab@groupstudy.com
Subject: RADIUS
hi all.
i am looking for some good information to put up a RADIUS server that
are
going to give ip addresses to customers based on a username that is sent
by
the router...
Anybody
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:40 GMT-3