From: Bob Sinclair (bob@bobsinclair.net)
Date: Sat Mar 25 2006 - 15:28:38 GMT-3
Dave,
Anycast RP does not require BGP peering.
Verify with
show ip msdp peer
show ip msdp summary
originator id is not required
Bob Sinclair
CCIE #10427, CCSI 30427
www.netmasterclass.net
----- Original Message -----
From: david robin
To: Cisco certification
Sent: Saturday, March 25, 2006 1:17 PM
Subject: anycast (ip multicast question)
I have a question,
we have two routers r1 and r2, the two routers has the same loopback
address
( loop 2) and i want to configure them for rp anycast, this will require
msdp configuration as follow:
r1
ip msdp peer r2 connect-source loop 0
ip msdp originator-id loop 0
and the same config on r2
the question is for the anycast rp to work does the two routers require bgp
peering between them for the msdp t or not ?
_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:40 GMT-3