Re: policy route question

From: Alexei Monastyrnyi (alexeim@orcsoftware.com)
Date: Fri Mar 24 2006 - 19:24:42 GMT-3


if trafic doesn't match policy routing, it is routed according to the
routing table

A.

----- Original Message -----
From: "John Matus" <John.Matus@tokiom.com>
To: <ccielab@groupstudy.com>
Sent: Friday, March 24, 2006 10:28 PM
Subject: policy route question

> if you just want to policy route one kind of traffic but not any other
> should you use a "permit 1000" statement to allow the other traffic to
> pass
> thru or does the other traffic just know intuitively not to be policy
> routed if it does not match the ACL in the route-map
>
> EXAMPLE
>
> route-map policy permit 10
> match ip address 111
> set ip next-hop 132.1.23.3
> !
> route-map policy permit 20
>
> should i used the "permit 20" or not?
>
>
> Regards,
>
> John D. Matus
> Technical Support / PAS
> Fujitsu Consulting
> 626-568-7716
> John.Matus@tokiom.com
> ========================================================================================================
> This e-mail is intended solely for the individual to whom it is
> addressed. The information contained in this transmission
> contains
> confidential and/or proprietary information or is otherwise privileged.
> If
> the reader of this message is not the intended recipient, please be
> advised
> that any dissemination, distribution or copying of this transmission
> is
> strictly prohibited. If you have received this e-mail in error,
> please
> notify us immediately by returning it to the sender and deleting this
> copy
> from your system. Thank you for your
> cooperation.
> ========================================================================================================
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html



This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:40 GMT-3