From: John Matus (John.Matus@tokiom.com)
Date: Fri Mar 24 2006 - 18:28:11 GMT-3
if you just want to policy route one kind of traffic but not any other
should you use a "permit 1000" statement to allow the other traffic to pass
thru or does the other traffic just know intuitively not to be policy
routed if it does not match the ACL in the route-map
EXAMPLE
route-map policy permit 10
match ip address 111
set ip next-hop 132.1.23.3
!
route-map policy permit 20
should i used the "permit 20" or not?
Regards,
John D. Matus
Technical Support / PAS
Fujitsu Consulting
626-568-7716
John.Matus@tokiom.com
========================================================================================================
This e-mail is intended solely for the individual to whom it is
addressed. The information contained in this transmission contains
confidential and/or proprietary information or is otherwise privileged. If
the reader of this message is not the intended recipient, please be advised
that any dissemination, distribution or copying of this transmission is
strictly prohibited. If you have received this e-mail in error, please
notify us immediately by returning it to the sender and deleting this copy
from your system. Thank you for your cooperation.
========================================================================================================
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:40 GMT-3