From: Alexei Monastyrnyi (alexeim@orcsoftware.com)
Date: Fri Mar 24 2006 - 12:00:01 GMT-3
you can use an IP precedence or even better a DSCP for that
on 24/03/2006 15:54 Bill.McKenzie@bisys.com wrote:
> Thanks for the info.
>
> I just want to get this straight. Even if I set COS 1 on this, when it
> arrives at the provider ( on our border Router, IP Enabled Frame Cloud)
> there will be nothing set at all?
> Is there an equatable setting that automatically matches a COS 1 or is it
> something that I will have to set and let the provider know so they
> could re-mark it as a COS 1 in their network?
>
> Bill
>
>
>
>
>
> "Exceeding Client Expectations"
>
>
>
> "Joshua Lauer"
> <jslauer@hotmail.
> com> To
> "Alexei Monastyrnyi"
> 03/24/2006 09:45 <alexeim@orcsoftware.com>,
> AM <Bill.McKenzie@bisys.com>
> cc
> <ccielab@groupstudy.com>
> Subject
> Re: QOS Config help
>
>
>
>
>
>
>
>
>
>
> Your DSCP marking will work,
>
> however as mentioned before setting COS on an
> outbound serial wont accomplish anything. If the
> outbound interface were an ethernet trunk port this
> would be a different story.
>
> jl
>
>
> Joshua Lauer
> CCNA, CCDA, CCNP, CCDP, CCSP, CCIP, RHCE, INFOSEC,
> CISSP, CEH
>
> ----- Original Message -----
> From: "Alexei Monastyrnyi" <alexeim@orcsoftware.com>
> To: <Bill.McKenzie@bisys.com>
> Cc: <ccielab@groupstudy.com>
> Sent: Friday, March 24, 2006 8:58 AM
> Subject: Re: QOS Config help
>
>
>
>> in this scenario cos will never be set up cause it
>> comes along with L2 tagging only (dot1q, isl etc)
>> which is not applicable to s1/0 interface (which
>> is serial, right?)
>>
>> A.
>>
>> on 24/03/2006 14:20 Bill.McKenzie@bisys.com wrote:
>>
>>> Sorry, Here is the correct config
>>>
>>> class-map VIDEO
>>> match access-group VIDEOSERVER
>>>
>>> class-map VOICE
>>> match access-group VOICE
>>>
>>> policy-map VIDEO&VOICE
>>> class VIDEO
>>> set cos 1
>>> priority 640
>>> !
>>> class VOICE
>>> set dscp ef
>>> priority 384
>>>
>>>
>>>
>>>
>>> ip access-list extended VIDEOSERVER
>>> permit ip host X.X.X.X any
>>>
>>> ip access-list extended VOICE
>>> permit udp any any eq 16384 32767
>>>
>>>
>>>
>>> int s1/0
>>> service-policy output VIDEO&VOICE
>>>
>>>
>>>
>>>
>>> TIA,
>>> Bill
>>>
>>>
>>>
>>> Bill McKenzie
>>> Network Support
>>> BISYS Fund Services
>>> Work: 614.428.3293
>>> Cell: 614.425.2370
>>>
>>> "Exceeding Client Expectations"
>>>
>>>
>>>
>>> Bill
>>> McKenzie/Columbus
>>> /BISYS
>>> To ccielab@groupstudy.com 03/24/2006
>>> 08:03
>>> cc AM
>>> Subject QOS Config help
>>>
>>>
>>> Hi,
>>>
>>> I was wondering if there would be any problem
>>> with this QOS configuration
>>> that I'm just not seeing. Do to provider QOS
>>> options we must tag traffic in
>>> a certain way to make it end-to-end QOS through
>>> the provider cloud.
>>>
>>>
>>> class-map VIDEO
>>> match access-group VIDEOSERVER
>>>
>>> class-map VOICE
>>> match access-group VOICE
>>>
>>> policy-map VIDEO&VOICE
>>> class-map VIDEO
>>> set cos 1
>>> priority 640
>>> !
>>> class-map VOICE
>>> set dscp ef
>>> priority 384
>>>
>>>
>>>
>>>
>>> ip access-list extended VIDEOSERVER
>>> permit ip host X.X.X.X any
>>>
>>> ip access-list extended VOICE
>>> permit udp any any eq 16384 32767
>>>
>>>
>>>
>>> int s1/0
>>> service-policy output VIDEO&VOICE
>>>
>>>
>>>
>>>
>>> TIA,
>>> Bill
>>>
>>>
>>>
>>> ============================================
>>> STATEMENT OF CONFIDENTIALITY
>>>
>>> The information contained in this electronic
>>> message and any attachments to
>>> this message are intended for the exclusive use
>>> of the addressee(s) and may
>>> contain confidential or privileged information.
>>> No representation is made
>>> on its accuracy or completeness of the
>>> information contained in this
>>> electronic message. Certain assumptions may have
>>> been made in the
>>> preparation of this material as of this date, and
>>> are subject to change
>>> without notice. If you are not the intended
>>> recipient, you are hereby
>>> notified that any dissemination, distribution or
>>> copying of this e-mail and
>>> any attachment(s) is strictly prohibited.
>>>
>>> Please reply to the sender and destroy all copies
>>> of this message and any
>>> attachments from your system.
>>>
>>> ============================================
>>> STATEMENT OF CONFIDENTIALITY
>>>
>>> The information contained in this electronic
>>> message and any attachments to
>>> this message are intended for the exclusive use
>>> of the addressee(s) and may
>>> contain confidential or privileged information.
>>> No representation is made
>>> on its accuracy or completeness of the
>>> information contained in this
>>> electronic message. Certain assumptions may have
>>> been made in the
>>> preparation of this material as of this date, and
>>> are subject to change
>>> without notice. If you are not the intended
>>> recipient, you are hereby
>>> notified that any dissemination, distribution or
>>> copying of this e-mail and
>>> any attachment(s) is strictly prohibited.
>>>
>>> Please reply to the sender and destroy all copies
>>> of this message and any
>>> attachments from your system.
>>>
>>> _______________________________________________________________________
>>> Subscription information may be found at:
>>> http://www.groupstudy.com/list/CCIELab.html
>>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>
>
> ============================================
> STATEMENT OF CONFIDENTIALITY
>
> The information contained in this electronic message and any attachments to
> this message are intended for the exclusive use of the addressee(s) and may
> contain confidential or privileged information. No representation is made
> on its accuracy or completeness of the information contained in this
> electronic message. Certain assumptions may have been made in the
> preparation of this material as of this date, and are subject to change
> without notice. If you are not the intended recipient, you are hereby
> notified that any dissemination, distribution or copying of this e-mail and
> any attachment(s) is strictly prohibited.
>
> Please reply to the sender and destroy all copies of this message and any
> attachments from your system.
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:40 GMT-3