From: Bill.McKenzie@bisys.com
Date: Fri Mar 24 2006 - 11:54:11 GMT-3
Thanks for the info.
I just want to get this straight. Even if I set COS 1 on this, when it
arrives at the provider ( on our border Router, IP Enabled Frame Cloud)
there will be nothing set at all?
Is there an equatable setting that automatically matches a COS 1 or is it
something that I will have to set and let the provider know so they
could re-mark it as a COS 1 in their network?
Bill
"Exceeding Client Expectations"
"Joshua Lauer"
<jslauer@hotmail.
com> To
"Alexei Monastyrnyi"
03/24/2006 09:45 <alexeim@orcsoftware.com>,
AM <Bill.McKenzie@bisys.com>
cc
<ccielab@groupstudy.com>
Subject
Re: QOS Config help
Your DSCP marking will work,
however as mentioned before setting COS on an
outbound serial wont accomplish anything. If the
outbound interface were an ethernet trunk port this
would be a different story.
jl
Joshua Lauer
CCNA, CCDA, CCNP, CCDP, CCSP, CCIP, RHCE, INFOSEC,
CISSP, CEH
----- Original Message -----
From: "Alexei Monastyrnyi" <alexeim@orcsoftware.com>
To: <Bill.McKenzie@bisys.com>
Cc: <ccielab@groupstudy.com>
Sent: Friday, March 24, 2006 8:58 AM
Subject: Re: QOS Config help
> in this scenario cos will never be set up cause it
> comes along with L2 tagging only (dot1q, isl etc)
> which is not applicable to s1/0 interface (which
> is serial, right?)
>
> A.
>
> on 24/03/2006 14:20 Bill.McKenzie@bisys.com wrote:
>> Sorry, Here is the correct config
>>
>> class-map VIDEO
>> match access-group VIDEOSERVER
>>
>> class-map VOICE
>> match access-group VOICE
>>
>> policy-map VIDEO&VOICE
>> class VIDEO
>> set cos 1
>> priority 640
>> !
>> class VOICE
>> set dscp ef
>> priority 384
>>
>>
>>
>>
>> ip access-list extended VIDEOSERVER
>> permit ip host X.X.X.X any
>>
>> ip access-list extended VOICE
>> permit udp any any eq 16384 32767
>>
>>
>>
>> int s1/0
>> service-policy output VIDEO&VOICE
>>
>>
>>
>>
>> TIA,
>> Bill
>>
>>
>>
>> Bill McKenzie
>> Network Support
>> BISYS Fund Services
>> Work: 614.428.3293
>> Cell: 614.425.2370
>>
>> "Exceeding Client Expectations"
>>
>>
>>
>> Bill
>> McKenzie/Columbus
>> /BISYS
>> To ccielab@groupstudy.com 03/24/2006
>> 08:03
>> cc AM
>> Subject QOS Config help
>>
>>
>> Hi,
>>
>> I was wondering if there would be any problem
>> with this QOS configuration
>> that I'm just not seeing. Do to provider QOS
>> options we must tag traffic in
>> a certain way to make it end-to-end QOS through
>> the provider cloud.
>>
>>
>> class-map VIDEO
>> match access-group VIDEOSERVER
>>
>> class-map VOICE
>> match access-group VOICE
>>
>> policy-map VIDEO&VOICE
>> class-map VIDEO
>> set cos 1
>> priority 640
>> !
>> class-map VOICE
>> set dscp ef
>> priority 384
>>
>>
>>
>>
>> ip access-list extended VIDEOSERVER
>> permit ip host X.X.X.X any
>>
>> ip access-list extended VOICE
>> permit udp any any eq 16384 32767
>>
>>
>>
>> int s1/0
>> service-policy output VIDEO&VOICE
>>
>>
>>
>>
>> TIA,
>> Bill
>>
>>
>>
>> ============================================
>> STATEMENT OF CONFIDENTIALITY
>>
>> The information contained in this electronic
>> message and any attachments to
>> this message are intended for the exclusive use
>> of the addressee(s) and may
>> contain confidential or privileged information.
>> No representation is made
>> on its accuracy or completeness of the
>> information contained in this
>> electronic message. Certain assumptions may have
>> been made in the
>> preparation of this material as of this date, and
>> are subject to change
>> without notice. If you are not the intended
>> recipient, you are hereby
>> notified that any dissemination, distribution or
>> copying of this e-mail and
>> any attachment(s) is strictly prohibited.
>>
>> Please reply to the sender and destroy all copies
>> of this message and any
>> attachments from your system.
>>
>> ============================================
>> STATEMENT OF CONFIDENTIALITY
>>
>> The information contained in this electronic
>> message and any attachments to
>> this message are intended for the exclusive use
>> of the addressee(s) and may
>> contain confidential or privileged information.
>> No representation is made
>> on its accuracy or completeness of the
>> information contained in this
>> electronic message. Certain assumptions may have
>> been made in the
>> preparation of this material as of this date, and
>> are subject to change
>> without notice. If you are not the intended
>> recipient, you are hereby
>> notified that any dissemination, distribution or
>> copying of this e-mail and
>> any attachment(s) is strictly prohibited.
>>
>> Please reply to the sender and destroy all copies
>> of this message and any
>> attachments from your system.
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
============================================
STATEMENT OF CONFIDENTIALITY
The information contained in this electronic message and any attachments to
this message are intended for the exclusive use of the addressee(s) and may
contain confidential or privileged information. No representation is made
on its accuracy or completeness of the information contained in this
electronic message. Certain assumptions may have been made in the
preparation of this material as of this date, and are subject to change
without notice. If you are not the intended recipient, you are hereby
notified that any dissemination, distribution or copying of this e-mail and
any attachment(s) is strictly prohibited.
Please reply to the sender and destroy all copies of this message and any
attachments from your system.
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:40 GMT-3