OT: Configuring 2600 for Cable Modem Router

From: Scott Thornton (scthornton@gmail.com)
Date: Thu Mar 23 2006 - 17:29:53 GMT-3

I am trying to use a 2600, with 2 ethernet interfaces as my router for a
cable modem network.

My plans are to connect the cable modem to one port, statically configure my
addresses, then configure the other ethernet interface for my internal
network and do dhcp. I was then going to put a default route pointing to
the cable modem interface.

Has anyone done anything like this? What do I do for DNS resolution?

The reason I am doing this is a limitation in my current Linksys router
where it only allows one simulataneous IPSec connection at a time. (

*
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faq
id=596&p_created=1084217914&p_sid=vOXQZ63i&p_accessibility=0&p_lva=&p_sp=cF9z
cmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9MSZwX3Byb2RzPTAmcF9jYXRzP
SZwX3B2PSZwX2N2PSZwX3NlYXJjaF90eXBlPWFuc3dlcnMuYV9pZCZwX3NjZl9sYW5nPTEmcF9wYW
dlPTEmcF9zZWFyY2hfdGV4dD01OTY*&p_li=&p_topview=1
*<http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_f
aqid=596&p_created=1084217914&p_sid=vOXQZ63i&p_accessibility=0&p_lva=&p_sp=cF
9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9MSZwX3Byb2RzPTAmcF9jYXR
zPSZwX3B2PSZwX2N2PSZwX3NlYXJjaF90eXBlPWFuc3dlcnMuYV9pZCZwX3NjZl9sYW5nPTEmcF9w
YWdlPTEmcF9zZWFyY2hfdGV4dD01OTY*&p_li=&p_topview=1>
)

TIA. 

--
Scott C Thornton

Notice: This e-mail (including attachments) is covered by the Electronic
Communications Privacy Act, 18 U.S.C. 2510-2521, is confidential and may be
legally privileged.  If you are not the intended recipient, you are hereby
notified that any retention, dissemination, distribution, or copying of this
communication is strictly prohibited.  Please reply to the sender that you
have received the message in error, then delete it.  Thank you.

This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:40 GMT-3