From: Kemal Yildirim \(Netron\) (Kemal.Yildirim@netron.com.tr)
Date: Thu Mar 23 2006 - 16:58:25 GMT-3
Hi all,
Sometimes it is not allowed to use "ip ospf cost" command, and then you
can use "bandwidth" command under related interfaces. But this time you
may effect the EIGRP metric if you are running both protocols. You may
need to adjust EIGRP metric by changing the "delay" parameter under
interfaces.
Just a paranoid thinking!
Regards,
Kemal
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
CCIE KH49279
Sent: Thursday, March 23, 2006 7:38 PM
To: simone.ciscolab@gmail.com; ccielab@groupstudy.com
Subject: RE: Backup interface
In ospf you can manipulate the ip ospf cost under the inteface.
An example below (my apologies if this drifts towards being OT, but it
will
bring relevance to the COST issue.)
For instance you have a PPP link in parallel with a frame circuit
between R1
and R2, and we will assume many other links in the OSPF domain. If both
circuits are in Area 0 then you can just manipulate cost accordingly.
If
you are having to use multiple areas, for example the frame circuit is
area
0, and the ppp link is area 12. You can manipulate the COST parameters
so
the frame circuit is used. And if there is a failure of the FR circuit
then
the ppp cirucit will be used as. Don't forget about your pesky
virtual-link
to keep area 0 contigous if there is a FR failure.
HTH,
Wayne
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
simone.ciscolab@gmail.com
Sent: Thursday, March 23, 2006 11:05 AM
To: ccielab@groupstudy.com
Subject: Re: Backup interface
without using the backup interface command... forget about the "no" on
the
previous post!
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:40 GMT-3