From: KC (kanwal.chawla@gmail.com)
Date: Wed Mar 22 2006 - 12:07:22 GMT-3
This link doesnt help me, i understand the whole concept of Fallback
Bridging. The only thing is that both routers can t ping to each other and
even switch pings just one rouer. If i give ip add to VLAN 22, switch pings
R5, if i give IP to router port, switch pings R2
This is the problem i am facing
On 3/22/06, PhiL <theccie@gmail.com> wrote:
>
>
>
http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/12225see/scg/swfall
bk.htm
>
> On 3/22/06, KC <kanwal.chawla@gmail.com> wrote:
>
> > R5 - Eth0(1.1.10.5)---------------------(switched port) SW1
> |
> |
> |
> (Routed Port)
>
> - 1.1.10.3
> |
> |
> |
> |
> |
> |
> |
>
> R2(Ether - 1.1.10.2)
>
> hey Guys, Help me out with Fallback Bridging
>
> Question wants R5 Ethernet port is connected to switched port of Sw1 in
> Vlan22. R2 ether is connected to switch's Routed port. Now i have to
> enable
> FallBack bridging, what commands i have to fill on the switch
> what i did :-
>
> Switch - config)#int fa0/5
> switchport mode access
> switch access vlan 22
>
> config)# int fa0/2
> no switchport
> no ip add
> bridge-group 1
>
> config)# int vlan 22
> ip add 1.1.10.3
> bridge-group 1
>
> config)# bridge 1 vlan-bridge
> config)# bridge 1 acquire
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
> --
> Regards,
>
>
> PhiL
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:39 GMT-3