From: KC (kanwal.chawla@gmail.com)
Date: Wed Mar 22 2006 - 05:37:41 GMT-3
R5 - Eth0(1.1.10.5)---------------------(switched port) SW1
|
|
|
(Routed Port)
- 1.1.10.3
|
|
|
|
|
|
|
R2(Ether - 1.1.10.2)
hey Guys, Help me out with Fallback Bridging
Question wants R5 Ethernet port is connected to switched port of Sw1 in
Vlan22. R2 ether is connected to switch's Routed port. Now i have to enable
FallBack bridging, what commands i have to fill on the switch
what i did :-
Switch - config)#int fa0/5
switchport mode access
switch access vlan 22
config)# int fa0/2
no switchport
no ip add
bridge-group 1
config)# int vlan 22
ip add 1.1.10.3
bridge-group 1
config)# bridge 1 vlan-bridge
config)# bridge 1 acquire
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:39 GMT-3