From: Venkatesh Palani (kvpalani@gmail.com)
Date: Thu Mar 16 2006 - 08:10:31 GMT-3
yes it is typo, actually teh command is there
interface Virtual-Template1
no ip address
ppp multilink
ppp multilink group 1
!
interface Virtual-Template2
no ip address
ppp multilink
ppp multilink group 2
and by the way the error I get is as below and it is shown only on Router R3
not on R5 or R4
the IOS on all teh three wouters are the same Version 12.3(14)T4 all the
three routers are 3640
*Apr 9 14:51:13.743: %FR-3-MLPOFR_ERROR: MLPoFR not configured properly on
Link Virtual-Access3 Bundle Multilink2 :Frame Relay traffic shaping must be
enabled
*Apr 9 14:51:14.151: %FR-3-MLPOFR_ERROR: MLPoFR not configured properly on
Link Virtual-Access4 Bundle Multilink1 :Frame Relay traffic shaping must be
enabled
*Apr 9 14:51:15.791: %FR-3-MLPOFR_ERROR: MLPoFR not configured properly on
Link Virtual-Access3 Bundle Multilink2 :Frame Relay traffic shaping must be
enabled
*Apr 9 14:51:16.199: %FR-3-MLPOFR_ERROR: MLPoFR not configured properly on
Link Virtual-Access4 Bundle Multilink1 :Frame Relay traffic shaping must be
enabled
*Apr 9 14:51:17.839: %FR-3-MLPOFR_ERROR: MLPoFR not configured properly on
Link Virtual-Access3 Bundle Multilink2 :Frame Relay traffic shaping must be
enabled
*Apr 9 14:51:18.243: %FR-3-MLPOFR_ERROR: MLPoFR not configured properly on
Link Virtual-Access4 Bundle Multilink1 :Frame Relay traffic shaping must be
enabled
*Apr 9 14:51:19.887: %FR-3-MLPOFR_ERROR: MLPoFR not configured properly on
Link Virtual-Access3 Bundle Multilink2 :Frame Relay traffic shaping must be
enabled
*Apr 9 14:51:20.295: %FR-3-MLPOFR_ERROR: MLPoFR not configured properly on
Link Virtual-Access4 Bundle Multilink1 :Frame Relay traffic shaping must be
enabled
*Apr 9 14:51:21.935: %FR-3-MLPOFR_ERROR: MLPoFR not configured properly on
Link Virtual-Access3 Bundle Multilink2 :Frame Relay traffic shaping must be
enabled
*Apr 9 14:51:22.339: %FR-3-MLPOFR_ERROR: MLPoFR not configured properly on
Link Virtual-Access4 Bundle Multilink1 :Frame Relay traffic shaping must be
enabled
On 3/16/06, Ivan <ivan@iip.net> wrote:
>
> R4
> int Virtual-Template1
>
> missed ppp multilink. Is it typo error ?
>
> > Hi,
> > here is the config
> >
> > it is between r3,r4 adn r5
> > R3
> >
> > interface Multilink1
> > ip address 145.1.0.3 255.255.255.0
> > ppp multilink
> > ppp multilink group 1
> > !
> > interface Multilink2
> > ip address 145.1.0.3 255.255.255.0
> > ppp multilink
> > ppp multilink group 2
> > interface Serial1/0.304 point-to-point
> > frame-relay interface-dlci 304 ppp Virtual-Template2
> > !
> > interface Serial1/0.305 point-to-point
> > frame-relay interface-dlci 305 ppp Virtual-Template1
> > !
> >
> >
> > interface Virtual-Template1
> > no ip address
> > ppp multilink
> > ppp multilink group 1
> > !
> > interface Virtual-Template2
> > no ip address
> > ppp multilink
> > ppp multilink group 2
> >
> >
> >
> > router R4
> >
> >
> > interface Multilink1
> > ip address 145.1.0.4 255.255.255.0
> > ppp multilink
> > ppp multilink group 1
> > !
> > interface Multilink2
> > ip address 145.1.0.4 255.255.255.0
> > ppp multilink
> > ppp multilink group 2
> > !
> > interface Ethernet0/0
> > ip address 145.1.47.4 255.255.255.0
> > half-duplex
> > !
> > interface Serial0/0
> > no ip address
> > encapsulation frame-relay
> > !
> > interface Serial0/0.403 point-to-point
> > frame-relay interface-dlci 403 ppp Virtual-Template1
> > !
> > interface Serial0/0.413 point-to-point
> > frame-relay interface-dlci 413 ppp Virtual-Template2
> > !
> > interface Ethernet0/1
> > no ip address
> > shutdown
> > half-duplex
> > !
> > interface Serial0/1
> > no ip address
> > encapsulation frame-relay
> > no keepalive
> > !
> > interface Virtual-Template1
> > no ip address
> > ppp multilink group 1
> > !
> > interface Virtual-Template2
> > no ip address
> > ppp multilink
> > ppp multilink group 2
> > !
> >
> >
> > R5
> >
> >
> > interface Multilink1
> > ip address 145.1.0.5 255.255.255.0
> > ppp multilink
> > ppp multilink group 1
> > !
> > interface Multilink2
> > ip address 145.1.0.5 255.255.255.0
> > ppp multilink
> > ppp multilink group 2
> > !
> >
> > interface Serial0/0
> > no ip address
> > encapsulation frame-relay
> > !
> > interface Serial0/0.503 point-to-point
> > frame-relay interface-dlci 503 ppp Virtual-Template1
> > !
> > interface Serial0/0.513 point-to-point
> > frame-relay interface-dlci 513 ppp Virtual-Template2
> >
> > interface Virtual-Template1
> > no ip address
> > ppp multilink
> > ppp multilink group 1
> > !
> > interface Virtual-Template2
> > no ip address
> > ppp multilink
> > ppp multilink group 2
> >
> >
> >
> >
> > _ venkatesh
> >
> > On 3/16/06, Alexei Monastyrnyi <alexeim@orcsoftware.com> wrote:
> > > could you post an exact configuration please?
> > >
> > > on 16/03/2006 10:10 Venkatesh Palani wrote:
> > > > Hi All,
> > > > I have some issues getting around configuring multilink over PPPoFR.
> Is
> > > > traffic shaping configuration a required one when we configure
> > > > Multilink PPPoFR ?
> > > > because I get the following message
> > > >
> > > > Apr 9 12:51:45.315: %FR-3-MLPOFR_ERROR: MLPoFR not configured
> properly
> > >
> > > on
> > >
> > > > Link Virtual-Access3 Bundle Multilink2 :Frame Relay traffic shaping
> > > > must
> > >
> > > be
> > >
> > > > enabled
> > > > *Apr 9 12:51:45.851: %FR-3-MLPOFR_ERROR: MLPoFR not configured
> > > > properly
> > >
> > > on
> > >
> > > > Link Virtual-Access4 Bundle Multilink1 :Frame Relay traffic shaping
> > > > must
> > >
> > > be
> > >
> > > > enabled
> > > >
> > > > I have 2 multilink interafces 1 and 2
> > > > and two virtual-templates 1 and 2
> > > > as you woudl have guessed 1 matches to 1 and 2 matches to 2
> > > >
> > > > The cisco documnet shows an example that has a QOS as part of the
> > > > configuration. coudl any oen shed more light on to this please ?
> > > >
> > > > Thank you,
> > > > venkatesh
> > > >
> > > >
> _______________________________________________________________________
> > > > Subscription information may be found at:
> > > > http://www.groupstudy.com/list/CCIELab.html
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> --
> Ivan
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:39 GMT-3