From: Victor Cappuccio (cvictor@protokolgroup.com)
Date: Tue Mar 14 2006 - 14:48:13 GMT-3
Thanks Darren but
Rack1R2#show ip int serial 0/0 | in Split
Split horizon is disabled
Rack1R2#show run interface serial 0/0 | in split
no ip split-horizon eigrp 100
Rack1R2#show ip int serial 0/0 | in Split
Split horizon is disabled
Rack1R2#conf te
Enter configuration commands, one per line. End with CNTL/Z.
Rack1R2(config)#interface serial 0/0
Rack1R2(config-if)#ip split-horizon eigrp 100
Rack1R2#show ip int serial 0/0 | in Split
Split horizon is disabled
Rack1R2#show run interface serial 0/0 | in split
Rack1R2#
Darren Browning escribis:
> Show IP int serial 0
>
>
>
>
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Victor Cappuccio
> Sent: 14 March 2006 16:48
> To: CCIE LAB
> Subject: EIGRP Split-Horizon.
>
> Hello Group..
>
> Is there any way to know that EIGRP Split-Horizon is enabled or Disabled
> in the interface using any show command distinct to show run interface ?
>
> Thanks
> Victor.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> ________________________________________________________________________
> This e-mail has been scanned for all viruses by Star. The service is
> powered by MessageLabs. For more information on a proactive anti-virus
> service working around the clock, around the globe, visit:
> http://www.star.net.uk
> ________________________________________________________________________
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:38 GMT-3