From: jeff.s.golia@verizon.com
Date: Tue Mar 14 2006 - 14:43:48 GMT-3
That does not work when Split-Horizon is disabled for EIGRP Specifically.
R1#sh run int e0
Building configuration...
Current configuration : 129 bytes
!
interface Ethernet0
ip address 11.0.0.1 255.0.0.0 secondary
ip address 116.0.0.1 255.0.0.0
no ip split-horizon eigrp 3
end
R1#sh ip int e0 | in Split
Split horizon is enabled
R1#
*******************************************
Jeffrey Golia
CCIE#14849
Tac Engineer (Converged Technology Services)
Verizon Enterprise Premise Solutions
Tel # 1-800-993-2264
email : Jeff.S.Golia@Verizon.com
*******************************************
"Darren Browning" <Darren.Browning@azzu.co.uk>
Sent by: nobody@groupstudy.com
03/14/2006 12:21 PM
Please respond to
"Darren Browning" <Darren.Browning@azzu.co.uk>
To
"Victor Cappuccio" <cvictor@protokolgroup.com>, "CCIE LAB"
<ccielab@groupstudy.com>
cc
Subject
RE: EIGRP Split-Horizon.
Show IP int serial 0
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Victor Cappuccio
Sent: 14 March 2006 16:48
To: CCIE LAB
Subject: EIGRP Split-Horizon.
Hello Group..
Is there any way to know that EIGRP Split-Horizon is enabled or Disabled
in the interface using any show command distinct to show run interface ?
Thanks
Victor.
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:38 GMT-3