From: Saad Adam (subjectvsobject@yahoo.com)
Date: Tue Mar 14 2006 - 10:24:31 GMT-3
Hi Huzefa,
Below is the error message decoder output for the message.
1. %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
Debugging or informational messages are being generated faster than they can be displayed on the console. To ensure that the messages could be seen, the rest of the system has been paused until the console output catches up. This condition might cause an interruption in time-critical operations (for example, maintaining an ISDN link).
Recommended Action: To reduce the number of debugging or informational messages that are displayed, use conditional debugging and turn off console logging. Enter the no logging console guaranteed command, or turn off link-state messages for some other interfaces.
HUZEFA RATLAMWALA <ratlamwala.huzefa@gmail.com> wrote:
Hi everyone,
I have 6505 switch showing me the following error, it keeps on flooding the
console and i cannot break the sequence.
Can someome help me with this ?
Galileo interrupt: PCI0 retry count expired
00:04:13: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging
out
put.
00:04:13: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging
out
put.
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:38 GMT-3