RE: missing or corrupted IOS on 2600

From: Shaikh, Nasir (Nasir.Shaikh@atosorigin.com)
Date: Tue Mar 07 2006 - 09:22:05 GMT-3

Tim,
Make sure your config-register is OK (you might have changed that to come into
rommon). A reset after that should work fine.
I am assuming you have a valid IOS on flash.

regards

Nasir Shaikh

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Tim
Sent: zondag 5 maart 2006 20:45
To: 'Evgeniy Voloshin'
Cc: ccielab@groupstudy.com
Subject: RE: missing or corrupted IOS on 2600

Yev,

Thanks buddy. That link is a big help.

I've got one more dumb question.

from rommon mode, how do I get out of that mode?

rommon 1>

I tried exit, quit, i, reset nothing seems to work.

Thanks again, Tim

  _____

From: Evgeniy Voloshin [mailto:e.voloshin@equant.ru]
Sent: Sunday, March 05, 2006 2:20 PM
To: Tim
Cc: ccielab@groupstudy.com
Subject: Re: missing or corrupted IOS on 2600

Hi Tim,

I think you must use tftpdnld command from ROMMON.
At cisco.com there are a lot of links, so this is one of this:
http://www.cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186
a008015bf9e.shtml 

---
Yev.

Tim wrote:

Hi guys,

I'm looking for a link that describes how to recover from a missing or
corrupted IOS in flash on a 2600.

I've been looking for over an hour.  I used the search function (useless).
I tried under product support.

I looked under Troubleshooting and Alerts.

Can someone point me in the right direction?

Thanks, Tim

This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:38 GMT-3