RE: missing or corrupted IOS on 2600

From: Tim (ccie2be@nyc.rr.com)
Date: Sun Mar 05 2006 - 16:44:50 GMT-3

• Next message: Nico van Niekerk \(ZA\): "RE: CCIE Wannabe in South Africa"
• Previous message: Evgeniy Voloshin: "Re: missing or corrupted IOS on 2600"
• Maybe in reply to: Tim: "missing or corrupted IOS on 2600"
• Next in thread: Shaikh, Nasir: "RE: missing or corrupted IOS on 2600"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Yev,

Thanks buddy. That link is a big help.

I've got one more dumb question.

from rommon mode, how do I get out of that mode?

rommon 1>

I tried exit, quit, i, reset nothing seems to work.

Thanks again, Tim

  _____

From: Evgeniy Voloshin [mailto:e.voloshin@equant.ru]
Sent: Sunday, March 05, 2006 2:20 PM
To: Tim
Cc: ccielab@groupstudy.com
Subject: Re: missing or corrupted IOS on 2600

Hi Tim,

I think you must use tftpdnld command from ROMMON.
At cisco.com there are a lot of links, so this is one of this:
http://www.cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186
a008015bf9e.shtml

---
Yev.
Tim wrote:
Hi guys,
 
 
 
I'm looking for a link that describes how to recover from a missing or
corrupted IOS in flash on a 2600.
 
 
 
I've been looking for over an hour.  I used the search function (useless).
I tried under product support.
 
 
 
I looked under Troubleshooting and Alerts.
 
 
 
Can someone point me in the right direction?
 
 
 
Thanks, Tim

• Next message: Nico van Niekerk \(ZA\): "RE: CCIE Wannabe in South Africa"
• Previous message: Evgeniy Voloshin: "Re: missing or corrupted IOS on 2600"
• Maybe in reply to: Tim: "missing or corrupted IOS on 2600"
• Next in thread: Shaikh, Nasir: "RE: missing or corrupted IOS on 2600"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:38 GMT-3