From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Sat Mar 04 2006 - 20:36:03 GMT-3
Did you try to do a TFTP download (tftpdnld) from ROMMON? Most of the
messages below are standard error messages when installing a new flash
module. The "bus error" message usually means some sort of problem but
I would still attempt to download the IOS from ROMMON.
http://www.cisco.com/en/US/products/hw/routers/ps259/products_tech_note0
9186a008015bf9e.shtml
Also make sure that you load a newer IOS version on the router as older
IOS versions will not see the flash once they have booted up.
Lastly you may try to boot the router from ROMMON but not write the
image the flash ((tftpdnld -r) and see if the flash module can be
detected after bootup. Below is an example:
http://www.internetworkexpert.com/resources/tftpdnld.htm
If you still have problems with the flash module let me know. I'll be
in the office later tonight and I'll look at the part number of some of
the 32meg flash modules I have. As you can tell I lead a very exciting
life ;-) IOS + CCIE + Saturday Night = one heck of a good time ;-)
HTH,
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Joshua
Sent: Saturday, March 04, 2006 1:48 PM
To: ccielab@groupstudy.com
Subject: 32 MB Flash for Cisco 2620
Hi, guys,
I bought a new 32 MB flash with MEM2620-32FSBOOT for cisco 2620 router.
After put them on, the bootrom shows version 12.2(10r)1, but system
cannot
detect flash. The information printed on flash is "Intel DA28F640
J5A150
A3387544 Flash". I searched the part number "DA28F640" and get one
result
says "Intel Flash EEPROM 64M 4Mx16/8Mx8". Does it mean this is 64M
flash?
Can somebody please verify the chip for me before i call the seller for
sending the wrong part??
System Bootstrap, Version 12.2(10r)1, RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 2002 by cisco Systems, Inc.
C2600 platform with 65536 Kbytes of main memory
bus error while trying to access flash - addr = 0x60000000
cannot read flash info
getdevnum warning: device "flash" has size of zero
bus error while trying to access flash - addr = 0x60000000
cannot read flash info
getdevnum warning: device "flash" has size of zero
open: read error...requested 0x4 bytes, got 0x0
trouble reading device magic number
boot: cannot open "flash:"
boot: cannot determine first file name on device "flash:"
Thanks!!
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:38 GMT-3