From: Sheahan, John (John.Sheahan@priceline.com)
Date: Thu Mar 02 2006 - 12:30:30 GMT-3
As long as the inside interface is on the same network as the server.
The only way I can see to do it is use two different ranges of
registered IP addreses on the concentrator (one on the outside, one on
the inside) and make sure your isp has a route to both pointing to your
concentrator. I have never configured NAT or PAT on the concentrator
itself (not sure if you can)...we always do that on a Pix.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
NOUR Rabii
Sent: Thursday, March 02, 2006 8:53 AM
To: nobody@groupstudy.com; ccielab@groupstudy.com
Subject: Concentrateur
Hi,
Can I connect a server with public address in inside path of an
concentrator
VPN3000.
Regards,
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:37 GMT-3