Re: Trunk of 5505

From: James Ventre (messageboard@ventrefamily.com)
Date: Sat Feb 25 2006 - 15:56:59 GMT-3

• Next message: Scott Morris: "RE: BGP Route reflector and Confederation"
• Previous message: Radoslav Vasilev: "QOS Policy propagation via BGP"
• Maybe in reply to: Rafay Aslam: "Trunk of 5505"
• Next in thread: PhiL: "Re: Trunk of 5505"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Can you please provide a "show port capabilities 2/13". Not all 5500
ports support DOT1Q.

James

Rafay Aslam wrote:
> Hi
> I am trying to setup trunk between my 2 Catalyst 5505s. I get this error
> message when i try to enable trunk on my fast ethernet port. I want to know
> if i can enable trunk on fastehternet ports on 5505s or it has to be fiber
> ports on SUP III. Below is errors message, show ver and show module.
> I tried enabling trunk of all of my ethernet module but got the same
> message.
>
> SW1 (enable) set trunk 2/13 on dot1q
> Feature not supported on Module 2.
> SW1 (enable)

• Next message: Scott Morris: "RE: BGP Route reflector and Confederation"
• Previous message: Radoslav Vasilev: "QOS Policy propagation via BGP"
• Maybe in reply to: Rafay Aslam: "Trunk of 5505"
• Next in thread: PhiL: "Re: Trunk of 5505"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Wed Mar 01 2006 - 11:28:18 GMT-3