From: PhiL (theccie@gmail.com)
Date: Sat Feb 25 2006 - 16:45:19 GMT-3
You cannot trunk ports on 5224 blades:
http://www.cisco.com/en/US/products/hw/switches/ps679/products_data_sheet0918
6a0080092615.html
On 2/25/06, James Ventre <messageboard@ventrefamily.com> wrote:
>
> Can you please provide a "show port capabilities 2/13". Not all 5500
> ports support DOT1Q.
>
> James
>
>
>
> Rafay Aslam wrote:
> > Hi
> > I am trying to setup trunk between my 2 Catalyst 5505s. I get this error
> > message when i try to enable trunk on my fast ethernet port. I want to
> know
> > if i can enable trunk on fastehternet ports on 5505s or it has to be
> fiber
> > ports on SUP III. Below is errors message, show ver and show module.
> > I tried enabling trunk of all of my ethernet module but got the same
> > message.
> >
> > SW1 (enable) set trunk 2/13 on dot1q
> > Feature not supported on Module 2.
> > SW1 (enable)
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Regards,PhiL
This archive was generated by hypermail 2.1.4 : Wed Mar 01 2006 - 11:28:18 GMT-3