IE lab 14 task 4.6

From: jacque vincent (jacque_vincent@hotmail.com)
Date: Thu Feb 16 2006 - 22:45:50 GMT-3

• Next message: Bob Sinclair: "Re: Using Anycast RP"
• Previous message: Venkatesh Palani: "Re: Using Anycast RP"
• Next in thread: Brian Dennis: "RE: IE lab 14 task 4.6"
• Maybe reply: Brian Dennis: "RE: IE lab 14 task 4.6"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Did anybody got the following config working with the EIGRP authentication?
R3 being the hub and R1&R5 the spokes.

Thanks

R3
!
key chain TEST
key 5
  key-string CISCO5
key 13
  key-string CISCO13
!
!
interface Serial1/0
ip address 167.1.135.3 255.255.255.0
ip authentication mode eigrp 100 md5
ip authentication key-chain eigrp 100 TEST
encapsulation frame-relay
no ip split-horizon eigrp 100
frame-relay map ip 167.1.135.1 301 broadcast
frame-relay map ip 167.1.135.5 305 broadcast
no frame-relay inverse-arp
!

• Next message: Bob Sinclair: "Re: Using Anycast RP"
• Previous message: Venkatesh Palani: "Re: Using Anycast RP"
• Next in thread: Brian Dennis: "RE: IE lab 14 task 4.6"
• Maybe reply: Brian Dennis: "RE: IE lab 14 task 4.6"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Wed Mar 01 2006 - 11:28:18 GMT-3