From: Jamie Caesar (jamie.caesar@gmail.com)
Date: Wed Feb 08 2006 - 15:05:38 GMT-3
You can verify on the router on the other side of the link with
access-lists. Something like:
access-list 101 permit ip any any prec 5
access-list 101 permit ip any any dscp af11
access-list 101 permit ip any any
To see how many packets are being marked with precedence 5, or packets
marked with dscp of af11.
Also if you are using MQC, the "show policy interface" command should tell
you on the local router how many packets were marked in a particular traffic
class.
Jamie
On 2/8/06, TK ... <nuvo25@hotmail.com> wrote:
>
> Dear Group,
>
> I'm practicing packet marking with different method, such as PBR, and MQC.
> However, I don't know how to test it to see whether it works? Is there any
> debug command or show command that we can used to verify that the traffic
> that match the configured criteria actually be marked with configured
> marking
> values?
>
> Thank you very much
>
> Jonathan...
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Mar 01 2006 - 11:28:17 GMT-3