From: Anderson Mota Alves (mota_anderson@hotmail.com)
Date: Wed Feb 08 2006 - 10:39:04 GMT-3
Hi everyone, I have a requirement to make stated below and I made a
resolution yesterday in my lab but the problem is that when I tried to
assign an ip address to an interface logged in level 5 with the commands
I configured I can't make it, so I was wondering if someone here could
help me out?Configure an user in privilege mode 5 with username user5 and
password user5 and he must be able to do the following:
Make an extended ping
Configure interfaces
Assign and remove IP address to an interface
Save the config in NVRAM
and turn off all the debugging in the router My resolution:username
cisco5 privilege 5 password 0 cisco5
enable secret level 5 5 $1$bkFU$AyQYwdii5.bP8n4hMKut6. privilege
configure level 5 interface
privilege configure level 5 ip address
privilege exec level 5 ping
privilege exec level 5 configure terminal
privilege exec level 5 copy run start
privilege exec level 5 undebug all line console 0
login local Any comments are really appreciated !!! Regards,
Andy
This archive was generated by hypermail 2.1.4 : Wed Mar 01 2006 - 11:28:17 GMT-3