From: PANDI MOORTHY (moorthypandi@gmail.com)
Date: Wed Feb 08 2006 - 09:15:14 GMT-3
great, got it. Thanks
Regards.
Pandi
On 2/8/06, Anderson Mota Alves <mota_anderson@hotmail.com> wrote:
>
> Hi Pandi,
>
> Yes you have to use "no frame-relay inverse-arp" in both cases because it
> says "Do not use frame relay inverse ARP to build the FR network" the
> statement is telling you TO NOT USE so if you leave the frame-relay without
> puting the command "no frame-relay inverse-arp" you would be using
> frame-relay inverse-arp so the "do not use" tells you to use the command,
> you see the ccie lab apart from your knoweldge you have to be careful with
> the wording of the requirements, they seems to be tricky most of the time.
>
> So both of the cases use "no frame-relay inverse-arp" and other things
> such as redistribution when you read something telling you do a
> redistribution between OSPF and RIP (the between means mutual
> redistribution) from OSPF to RIP and RIP to OSPF.
>
> I hope it helps,
>
> Andy
>
>
>
>
> ------------------------------
> From: *PANDI MOORTHY <moorthypandi@gmail.com>*
> Reply-To: *PANDI MOORTHY <moorthypandi@gmail.com>*
> To: *Cisco certification <ccielab@groupstudy.com>*
> Subject: *confused with using the command "no frame-relay inverse-arp*
> Date: *Wed, 8 Feb 2006 17:25:03 +0800*
> >Hi group
> >
> >
> >
> >Frame-relay question in IE lab work,
> >
> >
> >
> >For some scenario the requirement is "Do not use any dynamic frame relay
> >mapping" to build the FR network
> >
> >
> >
> >And for other scenario the requirement is "Do not use frame relay inverse
> >ARP to build the FR network
> >
> >
> >
> >
> >
> > I am confused with using the command "no frame-relay inverse-arp",
> should I
> >need to configure this command both question?
> >
> >
> >
> >
> >Need your help. Thanks in advance
> >
> >Regards.
> >Pandi Moorthy
> >
> >_______________________________________________________________________
> >Subscription information may be found at:
> >http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Mar 01 2006 - 11:28:17 GMT-3