From: Chris Cole (CCole@EPLUS.com)
Date: Tue Jan 31 2006 - 19:57:13 GMT-3
Hello all, has any one used GLBP with two ISP's. I have been looking for
an good example, I have not found one yet. If any one has dealt with
this? I have not used GLBP before so just putting out the feelers.
Basically I have a remote site connected to two ISP's it's a MPLS WAN
for both ISP's.
Remote sites have two routers one for each ISP connection.
Two data centers, each with a connection to both ISP's
The LAN side is a flat segment with no layer 3 switch (I know).
Thanks for any input.
Chris Cole
Senior Network Engineer
CCIE# 10561 R&S
ePlus Technology, an ePlus Company
13595 Dulles Technology Drive
Herndon, Virginia 20171
(703) 984-8031 (office)
(703) 675-3029 (cell)
ccole@eplus.com <mailto:ccole@eplus.com>
www.eplus.com <http://www.eplus.com>
THE INFORMATION CONTAINED IN THIS ELECTRONIC TRANSMISSION AND ANY
ATTACHMENTS HERETO IS CONSIDERED PROPRIETARY AND CONFIDENTIAL.
DISTRIBUTION OF THIS MATERIAL TO ANYONE OTHER THAN THE ADDRESSED IS
PROHIBITED. ANY DISCLOSURE, COPYING, DISTRIBUTION OR USE OF THE CONTENTS
OF THIS TRANSMISSION OR ANY ATTACHMENTS HERETO FOR ANY REASON OTHER THAN
THEIR INTENDED PURPOSE IS PROHIBITED. IF YOU HAVE RECEIVED THIS
TRANSMISSION IN ERROR, PLEASE CONTACT THE SENDER
This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:51 GMT-3