From: PANDI MOORTHY (moorthypandi@gmail.com)
Date: Wed Jan 25 2006 - 02:14:50 GMT-3
HI
Thanks for your response, operation wise I got clear picture for bootp, but
one think still not clear is
Ex:
ip dhcp server 10.1.1.1 (config mode)
ip helper-address 10.1.1.1 (interface mode)
Both commands are configured to send the dhcp request to the server 10.1.1.1.
I just would like understand the difference between these two..
Regards.
Pandi
On 1/25/06, Faryar Zabihi (fzabihi) <fzabihi@cisco.com> wrote:
>
> Specifies the dhcp server ip address. The dhcp server need not be on
> the same subnet as the Ethernet interface(with helper address
> configured). It can be more than one hop away as long has it is
> reachable.
>
> The ip helper address command enables BOOTP broadcast forwarding for a
> set of clients. The helper address specifies the address of the DHCP
> server configured.
>
> Faryar Zabihi
> Cisco Systems Inc.
> Richardson, TX 75082
>
> For urgent network matters, please call the Cisco Technical Assistance
> Center (TAC) at 1-800-553-2447
> All Cisco security advisories are available at www.cisco.com/go/psirt
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> PANDI MOORTHY
> Sent: Tuesday, January 24, 2006 9:46 PM
> To: Cisco certification
> Subject: Difference between these two commands "ip dhcp-server X.X.X.X"
> and " ip helper-address X.X.X.X"
>
> Hi All
>
> Could anyone explain to me, what is the difference between these two
> commands "ip dhcp-server X.X.X.X" and " ip helper-address X.X.X.X" in
> terms of forwarding the client dhcp request to the server.
>
>
>
> I am confused with above two commands, not sure which one to use.
>
>
>
>
>
> Thanks in advance.
>
>
> Regards.
> Pandi
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:50 GMT-3