From: Thomwin Chen (thomwin_chen@yahoo.com)
Date: Tue Jan 24 2006 - 03:21:15 GMT-3
thanks Brian,
so you mean, prepare two config ?
lets say :
config A consists :
!
interface bri0/0
no shut
!
config B consists :
!
interface bri0/0
shut
!
Rgds,
Thomwin
Brian Dennis <bdennis@internetworkexpert.com> wrote:
The "kron" feature will not allow configuration commands to be executed.
The best you could do with the kron is to have it download a
configuration via TFTP.
HTH,
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Thomwin Chen
Sent: Monday, January 23, 2006 9:25 PM
To: Schulz, Dave; ccielab@groupstudy.com
Subject: Re: Time-range question
Hi Dave,
command scheduler (kron) perhaps ?
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123newft
/123_1/g_kron.htm
Rgds,
Thomwin
"Schulz, Dave" wrote:
Does anyone know if there is a command in any version of IOS that will
allow
you to shut a port down and turn it up based on a time-range? I am
looking
for something that would disallow an ISDN to dial after hours.
Dave
This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:50 GMT-3