Re: 3620 and OSPFv3 support

From: ajaz nawaz (ajaz.nawaz@gmail.com)
Date: Sun Jan 22 2006 - 15:31:15 GMT-3

Next message: Leigh Nash: "Clearing dynamic ACL"
Previous message: James Matrisciano: "RE: How to disable the "Last configuration change at xxx " in"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Cham as Brian correctly pointed out - you will also notice 12.3 advanced
feature sets are not being developed for this platform.
The reason for this is probably due to the dram limitation of 64mb max and
not the flash as with the 2620/21 chassis.
hth

-- Ajaz Nawaz

----- Original Message ----- From: "Cham" <chamandeep.gill@gmail.com> To: "Cisco certification" <ccielab@groupstudy.com> Sent: Sunday, January 22, 2006 4:19 PM Subject: RE: 3620 and OSPFv3 support

Hi all,

I have had a look through GS archive and checked on CCO, however am unable to find any information on a 3620 supporting OSPFv3. I have loaded 12.2(15) T17 IP PLUS, this does not seem to support OSPFv3 on the 3620 but does on the 2500?

Thanks, Cham

Next message: Leigh Nash: "Clearing dynamic ACL"
Previous message: James Matrisciano: "RE: How to disable the "Last configuration change at xxx " in"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:50 GMT-3