From: Chris Lewis (chrlewiscsco@gmail.com)
Date: Sat Jan 21 2006 - 18:25:37 GMT-3
Rionando,
You have the right configuration and it is allowed, the message you see is
just a warning that nbma-mode does nothing for dense mode operations.
However, it does help when sparse is operating for the group.
Chris
On 1/21/06, Victor Cappuccio <cvictor@protokolgroup.com> wrote:
>
> Hello, I must admit that Multicast is not my strong, but logics tells me
> that is you want to separate the Outgoing List Interface using Dense mode,
> then a solution with Gre Tunnels would be the right choice..
> Any opinion about this please
> Thanks
>
>
> -----Mensaje original-----
> De: nobody@groupstudy.com [mailto:nobody@groupstudy.com] En nombre de
> Rionando@swadharma.com
> Enviado el: viernes, 20 de enero de 2006 3:18
> Para: Victor Cappuccio
> CC: ccielab@groupstudy.com; 'Mohammed Shameen Abdul Jabbar'; 'de Witt,
> Duane'; 'Gustavo Novais'; nobody@groupstudy.com; Rionando@swadharma.com
> Asunto: RE: Multicast : Auto RP with PIM NBMA mode
>
> Hi all,
> Yup, there is in Hub and Spoke topology,
>
> R1--------
> |
> R2----R4
> |
> R3-----
>
>
> R1,R2,R3 F/R hub and Spoke, R1 & R3 Spoke, R2 Hub (All Physical interface)
> R2 as RP with auto rp,
> R4 as RP mapping agent
>
> When I use IP PIM sparse mode with IP PIM nbma mode on R2, R1 and R3 do
> not receive RP discover from R4.
> When I use IP PIM sparse-dense mode with IP PIM nbma modon R2, Router said
> : "PIM nbma-mode is not recommended for sparse-dense-mode", but with this
> configuration it running well, R1 and R3 receive RP discover from R4.
> The question is, Using PIM Sparse-dense mode or dense mode with IP PIM nbm
> mode is allowed or not allowed ?
>
>
> Yoshe Rionando Y.
> PT. Swadharma Duta Data
> Network System Dept.
> Network System Engineer
> phone : 62 21 8318881
> fax : 62 21 8297293
> mobile : 62 8159084895
>
>
>
>
> "Victor Cappuccio" <cvictor@protokolgroup.com>
> Sent by: nobody@groupstudy.com
> 01/20/2006 12:34 PM
> Please respond to
> "Victor Cappuccio" <cvictor@protokolgroup.com>
>
>
> To
> "'Mohammed Shameen Abdul Jabbar'" <ccie.xpert@gmail.com>, "'Gustavo
> Novais'" <gustavo.novais@novabase.pt>
> cc
> "'de Witt, Duane'" <duane.dewitt@siemens.com>, <Rionando@swadharma.com>,
> <ccielab@groupstudy.com>
> Subject
> RE: Multicast : Auto RP with PIM NBMA mode
>
>
>
>
>
>
> Please sorry the SPAM
>
>
http://www.cisco.com/en/US/tech/tk828/technologies_white_paper09186a00800d6b
>
> 61.shtml#xtocid5
>
>
> -----Mensaje original-----
> De: Victor Cappuccio [mailto:cvictor@protokolgroup.com]
> Enviado el: viernes, 20 de enero de 2006 1:34
> Para: 'Mohammed Shameen Abdul Jabbar'; 'Gustavo Novais'
> CC: 'de Witt, Duane'; 'Rionando@swadharma.com'; 'ccielab@groupstudy.com'
> Asunto: RE: Multicast : Auto RP with PIM NBMA mode
>
> In a HUB and Spoke Topology??
> Ip pim nbma could help here?
>
>
> -----Mensaje original-----
> De: nobody@groupstudy.com [mailto:nobody@groupstudy.com] En nombre de
> Mohammed Shameen Abdul Jabbar
> Enviado el: viernes, 20 de enero de 2006 1:23
> Para: Gustavo Novais
> CC: de Witt, Duane; Rionando@swadharma.com; ccielab@groupstudy.com
> Asunto: Re: Multicast : Auto RP with PIM NBMA mode
>
> Hi,
>
> I would like to know what are the problems that is encountered when
> configuring PIM NBMA on frame-relay on Auto-RP.
>
> regards
> Shamin
>
>
> On 1/12/06, Gustavo Novais <gustavo.novais@novabase.pt> wrote:
> >
> > Hi
> >
> > See the comand ip pim auto-rp listener.
> >
> > It will enable auto-rp groups (224.0.1.39 and 224.0.1.40) be dense
> > flooded even if you only have sparse-mode configured.
> >
> > HTH
> >
> > Gustavo Novais
> >
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> > de Witt, Duane
> > Sent: quinta-feira, 12 de Janeiro de 2006 8:09
> > To: Rionando@swadharma.com; ccielab@groupstudy.com
> > Subject: RE: Multicast : Auto RP with PIM NBMA mode
> >
> > Maybe this can help:
> >
> > Choosing a Default RP
> > Sparse mode environments need a default RP; sparse-dense mode
> > environments do not. If you have sparse-dense mode configured
> > everywhere, you need not choose a default RP.
> >
> > Adding Auto-RP to a sparse mode cloud requires a default RP. In an
> > existing PIM sparse mode region, at least one RP is defined across the
> > network that has good connectivity and availability. That is, the ip pim
> > rp-address command is already configured on all routers in this network.
> >
> >
> > Use that RP for the global groups (for example, 224.x.x.x and other
> > global groups). There is no need to reconfigure the group address range
> > that RP serves. RPs discovered dynamically through Auto-RP take
> > precedence over statically configured RPs. Assume it is desirable to use
> > a second RP for the local groups.
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> > Rionando@swadharma.com
> > Sent: 12 January 2006 04:44 AM
> > To: ccielab@groupstudy.com
> > Subject: Multicast : Auto RP with PIM NBMA mode
> >
> > Hi Guys,
> > I have a problem Auto RP with PIM NBMA mode in frame-relay. Since auto
> >
> > RP need Dense mode to learned and the other side PIM NBMA mode do not
> > recomended Dense mode to operate.
> > Any suggestion ?
> >
> >
> >
> >
> > Yoshe Rionando Y.
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:50 GMT-3