From: Jonathan Stevens (jonathanstevens.net@googlemail.com)
Date: Sun Jan 22 2006 - 06:52:44 GMT-3
Generally Auto-RP requires dense mode support for it to function, but
you can configure with the listener command to get around this.
NBMA mode is not recommended with dense mode.
Mohammed Shameen Abdul Jabbar wrote:
>Hi,
>
>I would like to know what are the problems that is encountered when
>configuring PIM NBMA on frame-relay on Auto-RP.
>
>regards
>Shamin
>
>
>On 1/12/06, Gustavo Novais <gustavo.novais@novabase.pt> wrote:
>
>
>>Hi
>>
>>See the comand ip pim auto-rp listener.
>>
>>It will enable auto-rp groups (224.0.1.39 and 224.0.1.40) be dense
>>flooded even if you only have sparse-mode configured.
>>
>>HTH
>>
>>Gustavo Novais
>>
>>
>>-----Original Message-----
>>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
>>de Witt, Duane
>>Sent: quinta-feira, 12 de Janeiro de 2006 8:09
>>To: Rionando@swadharma.com; ccielab@groupstudy.com
>>Subject: RE: Multicast : Auto RP with PIM NBMA mode
>>
>>Maybe this can help:
>>
>>Choosing a Default RP
>>Sparse mode environments need a default RP; sparse-dense mode
>>environments do not. If you have sparse-dense mode configured
>>everywhere, you need not choose a default RP.
>>
>>Adding Auto-RP to a sparse mode cloud requires a default RP. In an
>>existing PIM sparse mode region, at least one RP is defined across the
>>network that has good connectivity and availability. That is, the ip pim
>>rp-address command is already configured on all routers in this network.
>>
>>
>>Use that RP for the global groups (for example, 224.x.x.x and other
>>global groups). There is no need to reconfigure the group address range
>>that RP serves. RPs discovered dynamically through Auto-RP take
>>precedence over statically configured RPs. Assume it is desirable to use
>>a second RP for the local groups.
>>
>>-----Original Message-----
>>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
>>Rionando@swadharma.com
>>Sent: 12 January 2006 04:44 AM
>>To: ccielab@groupstudy.com
>>Subject: Multicast : Auto RP with PIM NBMA mode
>>
>>Hi Guys,
>>I have a problem Auto RP with PIM NBMA mode in frame-relay. Since auto
>>
>>RP need Dense mode to learned and the other side PIM NBMA mode do not
>>recomended Dense mode to operate.
>>Any suggestion ?
>>
>>
>>
>>
>>Yoshe Rionando Y.
>>
>>_______________________________________________________________________
>>Subscription information may be found at:
>>http://www.groupstudy.com/list/CCIELab.html
>>
>>_______________________________________________________________________
>>Subscription information may be found at:
>>http://www.groupstudy.com/list/CCIELab.html
>>
>>_______________________________________________________________________
>>Subscription information may be found at:
>>http://www.groupstudy.com/list/CCIELab.html
>>
>>
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:50 GMT-3