From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Thu Jan 19 2006 - 03:46:00 GMT-3
The solutions are on our member's site:
http://members.internetworkexpert.com.
For the benefit for the people that do not own the IEWB-RS workbook here
is a link to the question, solution, and diagram.
http://www.internetworkexpert.com/downloads/mcast-helper.pdf
Also note at this point in the lab, multicast has already been
configured between the two routers (R1 & R2) in the question.
HTH,
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Nick
Sent: Wednesday, January 18, 2006 10:24 PM
To: ccielab@groupstudy.com
Subject: Re: Where is it?? IE LAB 8 vol1 -Multicast helper map Vs DOC CD
Dear Brian;
I tried to find IE solution from your web site, only to fail.
Where is it located? Or could you post the solution?
Regards,
Nick.
----- Original Message -----
From: "Brian Dennis" <bdennis@internetworkexpert.com>
To: "Anwar Chalamannil" <anwar.chalamannil@gmail.com>;
<ccielab@groupstudy.com>
Sent: Thursday, January 19, 2006 3:12 PM
Subject: RE: IE LAB 8 vol1 -Multicast helper map Vs DOC CD
> Personally I would go with the Internetwork Expert solution over the
> DocCD but that's just me ;-) Read over the solutions guide for this
> task and you will see how we verified the solution.
>
> HTH,
>
> Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
> bdennis@internetworkexpert.com
>
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com
> Toll Free: 877-224-8987
> Direct: 775-745-6404 (Outside the US and Canada)
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Anwar Chalamannil
> Sent: Wednesday, January 18, 2006 9:35 PM
> To: ccielab@groupstudy.com
> Subject: IE LAB 8 vol1 -Multicast helper map Vs DOC CD
>
> Hello
>
> In IE lab vol1 lab8 task 5.5
> In the solution
> Helper map is configured on input interfaces of both first hope and
and
> last hope router .
>
> But in doc CD it looks like helper map is configured on input
interface
> of
> first hop router and output interface of last hop router
>
>
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cg/hi
> mc_c/
> chap10/mcbcigmp.htm#wp1084257
>
> What would be the right solution ?
> Configuring helper map on input interface of last hop or on output
> interface
> of last hop ?
>
> Thanks
> Anwar
>
>
This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:49 GMT-3