From: Chris Lewis (chrlewiscsco@gmail.com)
Date: Sun Jan 15 2006 - 17:50:39 GMT-3
You can set the DE bit on the CE side (assuming that is a Cisco router) by
DE-list, a set command in MQC or as an exceed action in policing.
The frame-relay switches within the provide network are not Cisco routers
and the configuration will be dependant upon what devices they are :)
Not all frame relay providers use the DE bit for congestion management.
Chris
On 1/15/06, san <san.study@gmail.com> wrote:
>
> Chris,
>
> what will be the configuration difference between setting on CE side
> & provider side ?
>
> Thanks
> SAN
>
>
> On 1/15/06, Chris Lewis <chrlewiscsco@gmail.com> wrote:
> > When you set DE via a de-list on your router connecting to the frame
> relay
> > service, it is set regardless of CIR value.
> >
> > When the provider sets the DE bit within their cloud, it is usually the
> > traffic that is over CIR.
> >
> > Chris
> >
> >
> > On 1/15/06, Prio Utomo <rionaldi@gmail.com> wrote:
> > >
> > > Which traffic will be DE set, trafic above CIR or minCIR.
> > >
> > > Regards,
> > > rionaldi
> > >
> > >
> _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:49 GMT-3