From: InderpalS@mindscapeit.com
Date: Sun Jan 15 2006 - 08:02:42 GMT-3
I know that default is 75% minus (bandwidth for priority queues) but if
bandwidth value is given in kbps under policy map how does it help router to
set bandwidth value under interface?
_____
From: Peter McCreesh [mailto:petermccreesh@gmail.com]
Sent: Sunday, January 15, 2006 2:58 PM
To: InderpalS@mindscapeit.com
Cc: ccielab@groupstudy.com
Subject: Re: Bandwidth on interface
Hi Inder,
The fact that by default CBWFQ only uses 75% of available BW, this may
affect the amount you can assign to each class.
Other than that, i'm not sure.
Regards,
Pete
On 1/15/06, InderpalS@mindscapeit.com <mailto:InderpalS@mindscapeit.com>
<InderpalS@mindscapeit.com <mailto:InderpalS@mindscapeit.com> > wrote:
Hi Group,
When using CBWFQ, it is necessary to set interface bandwidth?
Scenario 1---------> I guarantee bandwidth for a class using Bandwidth (
)kbps command in policy map
Policy-map policy1
Class class1
Bandwidth 256
If we still need to set bandwidth on interface then why since we are giving
guaranteed bandwidth value in policy map.
Scenario 2---------> I reserve bandwidth for a class using bandwidth percent
command in policy map
Policy-map policy1
Class class1
Bandwidth percent 25
I understand in this scenario, interface bandwidth needs to be set so that
router can calculate available bandwidth and assign to class.
Any inputs are appreciated!
Regards,
Inder
1/15/2006 10:55:46 AM
Disclaimer
This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:49 GMT-3