From: Peter McCreesh (petermccreesh@gmail.com)
Date: Sun Jan 15 2006 - 07:58:19 GMT-3
Hi Inder,
The fact that by default CBWFQ only uses 75% of available BW, this may
affect the amount you can assign to each class.
Other than that, i'm not sure.
Regards,
Pete
On 1/15/06, InderpalS@mindscapeit.com <InderpalS@mindscapeit.com> wrote:
>
> Hi Group,
>
>
>
> When using CBWFQ, it is necessary to set interface bandwidth?
>
>
>
> Scenario 1---------> I guarantee bandwidth for a class using Bandwidth (
> )kbps command in policy map
>
>
>
> Policy-map policy1
>
> Class class1
>
> Bandwidth 256
>
>
>
> If we still need to set bandwidth on interface then why since we are
> giving
> guaranteed bandwidth value in policy map.
>
>
>
> Scenario 2---------> I reserve bandwidth for a class using bandwidth
> percent
> command in policy map
>
>
>
> Policy-map policy1
>
> Class class1
>
> Bandwidth percent 25
>
>
>
> I understand in this scenario, interface bandwidth needs to be set so that
> router can calculate available bandwidth and assign to class.
>
>
>
>
>
> Any inputs are appreciated!
>
>
>
> Regards,
>
> Inder
>
> 1/15/2006 10:55:46 AM
>
> Disclaimer
>
>
This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:49 GMT-3