From: AMILABS (amilabs@optonline.net)
Date: Wed Jan 11 2006 - 14:42:23 GMT-3
Check out
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Matthew Seppeler
Sent: Wednesday, January 11, 2006 12:32 PM
To: ccielab@groupstudy.com
Subject: FXS to FXO converter for an ATA 186
Not sure if this can be done but here it goes.
Does anyone know of a way or any adapter that would be able to convert one
of the FXS analog ports on a Cisco ATA 186 adapter to an FXO port that you
can connect to a PSTN Pots line?
What I'm trying to do is be able to get CCM 4.1 to send and receive OffNet
calls via a single analog POTS line without going through a gateway (cisco
router) with an FXO card.
Their is a pretty cheap 3rd party ATA adapter that has both an FXS and FXO
adapter. However, it only supports SIP v2 and I have not been able to get
this to work with CCM 4.1. The ATA adapter is a SIPURA SPA-3000 Analog
Telephone Adapter http://www.sipura.com/products/spa3000.htm
Any recommendations would be appreciated.
Matt
This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:48 GMT-3