From: Nick (seajay76@nate.com)
Date: Wed Jan 11 2006 - 10:40:01 GMT-3
For the Cos-3 to be sent
----- Original Message -----
From: <Bill.McKenzie@bisys.com>
To: <ccielab@groupstudy.com>
Sent: Wednesday, January 11, 2006 10:17 PM
Subject: wrr-queue bandwidth command
> Here is the requirement :
> Cos-3 must be sent of everything else and match the following cos values to
> according bandwidth.
>
> Cos 3 = 25%
> CoS 6,7 = 20%
> CoS 0,1,2 = 30%
> CoS 4,5 = 25%
>
> Here is the solution:
>
> wrr-queue bandwidth 4 6 5 5
> wrr-queue cos-map 1 6 7
> wrr-queue cos-map 2 0 1 2
> wrr-queue cos-map 3 4 5
> wrr-queue cos-map 4 3
> priority-queue out
>
>
> I don't understand the values in the wrr-queue bandwidth command and trying
> to look at the doc cd is just confusing me more. Can anyone point me to a
> better explanation of how the values were estimated?
>
> Thanks,
> Bill
>
>
>
> ============================================
> STATEMENT OF CONFIDENTIALITY
>
> The information contained in this electronic message and any attachments to
> this message are intended for the exclusive use of the addressee(s) and may
> contain confidential or privileged information. No representation is made
> on its accuracy or completeness of the information contained in this
> electronic message. Certain assumptions may have been made in the
> preparation of this material as of this date, and are subject to change
> without notice. If you are not the intended recipient, you are hereby
> notified that any dissemination, distribution or copying of this e-mail and
> any attachment(s) is strictly prohibited.
>
> Please reply to the sender and destroy all copies of this message and any
> attachments from your system.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:48 GMT-3