From: loke (loke14@gmail.com)
Date: Tue Jan 10 2006 - 19:50:14 GMT-3
Check the Doc CD:
http://cisco.com/univercd/cc/td/doc/product/lan/cat2950/12122ea5/index.htm
http://cisco.com/univercd/cc/td/doc/product/lan/cat3750/12225sed/index.htm
Nick
On 1/10/06, kiran parashare <meghkeeran@yahoo.com> wrote:
>
> Hi All,
> We would like to know the following things about the RPS300 Redundant
> power connector provided on rear panel of 3750 and 2950 Switch.
>
> 1. There are two voltage inputs -48V DC and 12 VDC. Are these both two
> inputs are essential for the switch to function or any of then input is
> sufficient?
> 2. Power consumption required by both the voltage inputs in Amps and
> Watts. Both are required 3. Reverse polarity protection provided with this
> Power inputs?
> Regards
> Kiran
>
>
> Send instant messages to your online friends http://uk.messenger.yahoo.com
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:48 GMT-3