From: ??? (seajay76@nate.com)
Date: Fri Jan 06 2006 - 13:12:15 GMT-3
Hi, Shamin.
If a host sends traffic to the multicast group,
it could be a multicast source.
So, why don't you just connect a PC or a router and
try to ping to the multicast group? ,which is a multicast source!
If I'm wrong, somebody please reply~
Regards,
Lee
----- Original Message -----
From: "Mohammed Shameen Abdul Jabbar" <ccie.xpert@gmail.com>
To: "Cisco certification" <ccielab@groupstudy.com>
Sent: Saturday, January 07, 2006 12:44 AM
Subject: What can be a multicast source?
> Hi,
>
> I am studying multicast concepts now and working out the scenarios in Jeff
> Doyle Vol 2.
> After i did configure all the routers,to test the configurations there need
> to be multicast source.
> Can anyone tell how will a Multicast source be set up!!
> Sorry if my question is too basic for this group.
>
>
> I have anothe question too..
> Does the clock rate configured on a DCE end has any effect on the interface
> bandwidth.
> FOr example the max available banwidth considerations that is done in QOS.
>
> Thankyou for the reply
>
> regards
> shamin
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:47 GMT-3