From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Thu Jan 05 2006 - 13:12:19 GMT-3
Correct, this applies to both the 2620 and 2621. 2610 and 2611 do not
support the flash upgrade, so you can only boot the image from tftp.
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Schulz, Dave
> Sent: Thursday, January 05, 2006 8:47 AM
> To: Leo Leung; Zamberlan, Diego; ccielab@groupstudy.com
> Subject: RE: Ospf v3 and 2600
>
> I'll confirm that....I have this same issue with my 2600 and have the
> memory and boot rom on order.
>
>
> Dave Schulz,
> Email: dschulz@dpsciences.com
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Leo Leung
> Sent: Thursday, January 05, 2006 9:39 AM
> To: Zamberlan, Diego; ccielab@groupstudy.com
> Subject: Re: Ospf v3 and 2600
>
> I run ipv6 ospfv3 on 2 of my 2620 routers with image
> of c2600-is-mz.123-15b.bin. You may need to upgrade
> flash/dram to 32/64M , in some cases even boot rom,
> because old boot rom may no be able to recognize the
> new flash.
>
> Leo
>
> --- "Zamberlan, Diego" <dzamberlan@verisign.com>
> wrote:
>
> > The question used to be "how do I run is-is and ipv6
> > on my 2500?"
> >
> > now the question seems to be "how do I run ospf v3
> > on my non xm 26xx?"
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com
> > [mailto:nobody@groupstudy.com] On Behalf Of
> > Brian McGahan
> > Sent: Wednesday, January 04, 2006 12:39 PM
> > To: Khurana, Sameer; ccielab@groupstudy.com
> > Subject: RE: IE ~ 2620 image?
> >
> > You need to look under 2600XM. If you don't have
> > the flash requirements
> > (32Mb) you can boot it from tftp:
> >
> http://www.internetworkexpert.com/resources/tftpdnld.htm
> >
> >
> > HTH,
> >
> > Brian McGahan, CCIE #8593
> > bmcgahan@internetworkexpert.com
> > Internetwork Expert, Inc.
> > http://www.InternetworkExpert.com
> > Toll Free: 877-224-8987 x 705
> > Outside US: 775-826-4344 x 705
> > 24/7 Support: http://forum.internetworkexpert.com
> > Live Chat: http://www.internetworkexpert.com/chat/
> >
> > ________________________________
> >
> > From: Khurana, Sameer [mailto:SKHURANA@amfam.com]
> > Sent: Tue 1/3/2006 3:31 PM
> > To: Brian McGahan; Brian Dennis;
> > ccielab@groupstudy.com
> > Subject: IE ~ 2620 image?
> >
> >
> >
> > Brian's:
> >
> > I was downloading the 2620 image from the Cisco
> > website but seems the
> > "Enterprise Plus" option is not there as per the IE
> > WB. The available
> > options for the 12.2(15)T16 are:
> >
> > ENTERPRISE BASIC
> > IP
> > IP PLUS
> > IP/FW/IDS
> > IP/FW/IDS PLUS IPSEC 3DES BASIC
> > IP/H323
> > IP/H323 PLUS BASIC
> > IP/IPX/APPLETALK
> > IP/IPX/AT/FW/IDS PLUS BASIC
> > REMOTE ACCESS SERVER
> > TELCO FEATURE SET
> >
> > Please let me know which one to choose from the
> > above list.
> >
> > Thanks,
> > Sameer
> >
> >
>
This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:47 GMT-3