From: Leo Leung (leoleung_yh@yahoo.com)
Date: Thu Jan 05 2006 - 11:38:51 GMT-3
I run ipv6 ospfv3 on 2 of my 2620 routers with image
of c2600-is-mz.123-15b.bin. You may need to upgrade
flash/dram to 32/64M , in some cases even boot rom,
because old boot rom may no be able to recognize the
new flash.
Leo
--- "Zamberlan, Diego" <dzamberlan@verisign.com>
wrote:
> The question used to be "how do I run is-is and ipv6
> on my 2500?"
>
> now the question seems to be "how do I run ospf v3
> on my non xm 26xx?"
>
> -----Original Message-----
> From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com] On Behalf Of
> Brian McGahan
> Sent: Wednesday, January 04, 2006 12:39 PM
> To: Khurana, Sameer; ccielab@groupstudy.com
> Subject: RE: IE ~ 2620 image?
>
> You need to look under 2600XM. If you don't have
> the flash requirements
> (32Mb) you can boot it from tftp:
>
http://www.internetworkexpert.com/resources/tftpdnld.htm
>
>
> HTH,
>
> Brian McGahan, CCIE #8593
> bmcgahan@internetworkexpert.com
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com
> Toll Free: 877-224-8987 x 705
> Outside US: 775-826-4344 x 705
> 24/7 Support: http://forum.internetworkexpert.com
> Live Chat: http://www.internetworkexpert.com/chat/
>
> ________________________________
>
> From: Khurana, Sameer [mailto:SKHURANA@amfam.com]
> Sent: Tue 1/3/2006 3:31 PM
> To: Brian McGahan; Brian Dennis;
> ccielab@groupstudy.com
> Subject: IE ~ 2620 image?
>
>
>
> Brian's:
>
> I was downloading the 2620 image from the Cisco
> website but seems the
> "Enterprise Plus" option is not there as per the IE
> WB. The available
> options for the 12.2(15)T16 are:
>
> ENTERPRISE BASIC
> IP
> IP PLUS
> IP/FW/IDS
> IP/FW/IDS PLUS IPSEC 3DES BASIC
> IP/H323
> IP/H323 PLUS BASIC
> IP/IPX/APPLETALK
> IP/IPX/AT/FW/IDS PLUS BASIC
> REMOTE ACCESS SERVER
> TELCO FEATURE SET
>
> Please let me know which one to choose from the
> above list.
>
> Thanks,
> Sameer
>
>
This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:47 GMT-3