From: joshua lauer (jslauer@hotmail.com)
Date: Mon Jan 02 2006 - 21:18:02 GMT-3
check the IPV6 configuration guide on CCO. there is detailed example on how
to convert and IPV4 address to V6. Your example here is incorrect. Remember
the V6 address is hex.
JL
----- Original Message -----
From: "Nadeem Zahid (iszahid)" <iszahid@cisco.com>
To: <ccielab@groupstudy.com>
Sent: Monday, January 02, 2006 7:00 PM
Subject: IPv6/IPv4 address
> I'm unable to determine how to configure IPv6 address on an interface
> such that its IPv4 address is used
> as IPv6 address. Example: if v4 address is 10.1.1.1/24 I try to
> configure v6 address as ::10.10.1.1 but it is
> rejected. Any references/config examples?
> regs
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:47 GMT-3