From: Zamberlan, Diego (dzamberlan@verisign.com)
Date: Wed Dec 28 2005 - 13:47:34 GMT-3
Where is the fun on doing that? Hack the hell out the AUX port is the
way to go! :)
On the other hand, if something doesn't work, you'll never be certain
where the issue is... As somebody said, this stuff is hard enough to
learn as it is, no need to add an extra layer of complexity...
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
James Matrisciano
Sent: Wednesday, December 28, 2005 11:01 AM
To: Chacko, Raj; Guyler, Rik; ccielab@groupstudy.com
Subject: RE: Using AUX port as Ethernet Interface
I would recommend saving the trouble and frustration and just buying a
2500 on ebay for 50 bucks that has two ethernet ports on it. :)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Chacko, Raj
Sent: Wednesday, December 28, 2005 10:56 AM
To: 'Guyler, Rik'; 'ccielab@groupstudy.com'
Subject: RE: Using AUX port as Ethernet Interface
How about using the aux ports with a rollover cable and configure a
tunnel between them. I saw a document on INTERNETWORKEXPERT web site
showing you how to do this.
Regards,
Raj
-----Original Message-----
From: Guyler, Rik [mailto:rguyler@shp-dayton.org]
Sent: Wednesday, December 28, 2005 9:40 AM
To: 'ccielab@groupstudy.com'
Subject: RE: Using AUX port as Ethernet Interface
No, it cannot be an Ethernet port. I don't know the scenario you're
using but can you just create loopback interfaces for the missing LAN
subnets?
Rik
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Mohammad Zahid Saeed
Sent: Wednesday, December 28, 2005 2:58 AM
To: ccielab@groupstudy.com
Subject: Using AUX port as Ethernet Interface
Hi,
May be this is not a good question but I just want to check that if
there is some way that I can use AUX port on the router as Ethernet
port? Actually I have R4 and R5 in my home lab as per IE lab work book
but these two have only one Ethernet Interface but in the IE Lab they
have two, so I wonder of some how I can use AUX port, if you know please
write back or send me the link of the document that may help in this
regard.
Regards
Mohammad Zahid Saeed
This archive was generated by hypermail 2.1.4 : Mon Jan 09 2006 - 07:07:52 GMT-3