From: Bobby Acker (aggiebob98@yahoo.com)
Date: Wed Dec 21 2005 - 16:16:49 GMT-3
Here is one for you...I understand that a layer 3 device will always pick the more specific match when routing to an object independent of it being static/connected/EIGRP/OSPF whatever, but for a PIX device we had the following scenario laid out in the route table (no we are not running a routing protocol):
route inside 192.168.0.0 255.255.0.0 172.26.2.254 1
route inside 192.168.243.0 255.255.255.0 172.16.2.254 1
route inside 192.168.245.0 255.255.255.0 172.16.2.254 1
In this case, if a packet is destined for 192.168.243.0 or 192.168.245.0 will it take their more specific routes laid out in the PIX or will it take the more general route above since it is first in the list order?
Thanks!
This archive was generated by hypermail 2.1.4 : Mon Jan 09 2006 - 07:07:51 GMT-3