From: T. N. Noble (tnn@ipnetexpert.com)
Date: Tue Dec 20 2005 - 15:52:54 GMT-3
You are downloading the file only into RAM not to FLASH and hence should be
OK.
Thanks,
Noble
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
CCIEin2006
Sent: Wednesday, December 21, 2005 12:08 AM
To: Brian McGahan
Cc: lab
Subject: Re: IE Workbook and OSPFv3
Yeah but the file is 17.4 meg and I only have 16 meg flash. How will it fit?
On 12/19/05, Brian McGahan <bmcgahan@internetworkexpert.com> wrote:
>
> You can boot the 2600XM 12.2T Enterprise Plus image to the 2620s
> via the "tftpdlnd -r" command in rommon. This will allow them to
> support OSPFv3.
>
>
> HTH,
>
> Brian McGahan, CCIE #8593
> bmcgahan@internetworkexpert.com
>
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com
> Toll Free: 877-224-8987 x 705
> Outside US: 775-826-4344 x 705
> 24/7 Support: http://forum.internetworkexpert.com
> Live Chat: http://www.internetworkexpert.com/chat/
>
>
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> Of
> > CCIEin2006
> > Sent: Saturday, December 17, 2005 5:09 PM
> > To: lab
> > Subject: IE Workbook and OSPFv3
> >
> > Hello group,
> >
> > In the Version 3 workbook, do all routers need to support OSPFv3?
> Which
> > labs
> > require it?
> > I am asking because most of my routers are 2620's with 64meg ram and
> 16meg
> > flash so the latest code I can load is 12.2(15)T Enterprise Basic.
> > Unfortunately only IP plus version of 12.2(15)T supports OSPFv3 and
> that
> > requires 32 meg ram.
> >
> > I do, however, have 3 2600XM routers which do support OSPFv3 will I be
> > able
> > to make due with those?
> >
> > Thanks!
> >
> >
> _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Jan 09 2006 - 07:07:51 GMT-3